On Mon, Jun 27, 2016 at 10:44 PM, John Stoffel john@stoffel.org wrote:
It would be nice if you could show the output of 'show int' for one of your 10g nodes and your 1g nodes. But I also find it surprising that you don't have a set of 10g switches for the InterClusterLinks, since that's the standard for Netapp installs of four nodes or more.
Did you just start with two nodes and just keep adding in FAS2250s or something? :-)
We tarted with 8040 x2 nodes, however I've never heard about the 10G infra for intercluster communications ..
Here is my current setup:
na101::> network interface show -role intercluster -fields lif,curr-node,curr-port vserver lif curr-node curr-port ------- ------------------- ------------ --------- na101 na101node-1a-icl-01 na101node-1a e2a <<-- 1Gb from here na101 na101node-1b-icl-01 na101node-1b e2a na101 na101node-2a-icl-01 na101node-2a e2a na101 na101node-2b-icl-01 na101node-2b e2a na101 na101node-3a-icl-01 na101node-3a e2a na101 na101node-3b-icl-01 na101node-3b e0i <<-- 1Gb till here na101 na101node-4a-icl-02 na101node-4a a0a <<-- 10Gb na101 na101node-4b-icl-02 na101node-4b a0a <<-- 10Gb 8 entries were displayed.
na101::> cluster peer show Peer Cluster Name Cluster Serial Number Availability Authentication ------------------------- --------------------- -------------- -------------- na201 XXXXXXXXX Available ok
Like I said it works fine, I just want to make it better =)