Hi all,
Last year I inherited an F740 filer with two FC9 shelves (7x36 GB disks). I used it happily at home for a few months and then a disk began to fail -- one had already failed, so that put the unit out of commission although luckily I was able to get all my data off it before total lossage. I bought a couple of Seagate ST136403FC drives -- the same model number as in the drive carriers -- off ebay and tried swapping them in, but no luck; the system wouldn't recognize them. On a hunch that it might have to do with firmware I tried swapping the drive's controller boards (old drives' controllers with new drives), but that didn't work either; the system wouldn't come up, dumping core for some reason. I figured the drives themselves probably needed to be zeroed/initialized/labeled in some way that made them acceptable to the Netapp, but I couldn't figure out any way to get the Netapp up and into a mode that would let me do that. Finally, lacking documentation for the system, I gave up.
Fast-forward a little, I just inherited a second filer, an F720, also with two FC9 (7x36) shelves. As far as I know all disks good. Unfortunately it won't boot up (it finds and loads the image, gives the "Initializing PCI devices" and then suddenly reboots itself, without even dumping core). I'm not sure what the problem could be.
I tried plugging in some of the disks from the new shelves in place of the bad disks in the old one, and now the 740 starts up and gives me a "File system may be scrambled" message -- well, of course it is, since the replaced disks contain who-knows-what, but I don't see how I can proceed from there. I'm not worried about getting back the original file system as I backed it up -- I just want to clear everything out and make a new one.
The situation seems to me to be this: I've got an F740 (and a spare F720), and four shelves with a grand total of 26 good, identical, disks (and maybe even 28, if I could get the drive controller swap to work). That's 900GB of storage.
I'm sure I should be able somehow to hook the four shelves up to the 740, reinitialize the whole system and all the drives somehow, and start afresh with a working 900GB filesystem. But I don't have the docs and floppy or whatever that came with the filers and I have no idea how to proceed given that the filer won't even start up to give me a command prompt that I might be able to work with. I'm not sure if I would need to boot from a floppy (I don't have one) or what...
Is there anyone out there who could help, in any way? I'd be forever grateful... For the few months I had the 740 running, it was heaven -- amazing having a file server like this at home, even though I was using only the smallest fraction of its capabilities. Now that I have four disk shelves, I'm really motivated to get it working again, but I'm truly stuck without documentation
Thanks so much for any help you could offer, Adam Jacobs mikkamakka@hotmail.com
.
_________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.com/