Thanks everyone for your responses.
Date: Wed, 30 Nov 2011 01:07:07 -0700 Subject: Re: 8.0.2p3 NTP issue? From: jeff.cleverley@avagotech.com To: klises@sutterhealth.org CC: John.Clear@amd.com; sklise@hotmail.com; toasters@teaparty.net
Steve,
Supposedly it has been fixed in your release, but you might look at burt 459942. I ran across this on my 8.0.1 filers. They mostly seemed to be keeping time once running, but I found they always ran fast after a reboot. Usually about 3 minutes per reboot. The OS upgrades that are supposed to have it fixed still had the problem, but they managed to get in sync within ~5 minutes. It also mentions KB 1010058.
You'll find that most of the timed options don't have any effect in 8.x anymore.
Jeff
On Tue, Nov 29, 2011 at 8:38 PM, Klise, Steve klises@sutterhealth.org wrote:
I will try that from a nix system.
I already tried to turn it off/on again. Same thing, but thanks, I will try that tomorrow.
Regards
Steve Klise
Storage Engineer, NCDA
PALO ALTO MEDICAL FOUNDATION
SUTTER HEALTH INFORMATION SERVICES
PENINSULA COASTAL REGION
Office: 408-523-3163 · Fax: 408-328-1406
e-mail: klises@sutterhealth.orgmailto:abouelj@sutterhealth.org
WARNING: "All e-mail sent to or from this address will be received or otherwise recorded by the Palo Alto Medical Foundation e-mail system and is subject to archival, monitoring or review by, and/or disclosure to, someone other than the recipient."
From: toasters-bounces@teaparty.net [toasters-bounces@teaparty.net] On Behalf Of Clear, John [John.Clear@amd.com] Sent: Tuesday, November 29, 2011 7:06 PM To: steve klise; toasters@teaparty.net Subject: RE: 8.0.2p3 NTP issue?
NTP on 8.x seems to much more fragile than it was under 7.x. It will often show as enabled, but not really be running, especially after network glitches.
From a unix box, run `ntpq -p FILER` and see if NTP is running. If it isn’t, do options timed.enable off, and then on again.
See https://kb.netapp.com/support/index?page=content&id=1012660 for more details.
John
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of steve klise Sent: Tuesday, November 29, 2011 4:31 PM To: toasters@teaparty.net Subject: 8.0.2p3 NTP issue?
may have hit a bug, but support dosen't show anything yet...
The time is off on an HA pair 3270's running DOT 8.0.2p3 7-mode. I have other filers that have the same NTP settings and are in synch. I had to manually set the time on these 3270's before I exceeded 5 minutes for my CIFS clients.
Has anyone else noticed or dose anyone have any suggestions?
Thanks
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
-- Jeff Cleverley Unix Systems Administrator 4380 Ziegler Road Fort Collins, Colorado 80525 970-288-4611