> Date: Wed, 30 Nov 2011 01:07:07 -0700
> Subject: Re: 8.0.2p3 NTP issue?
> From: jeff.cleverley@avagotech.com
> To: klises@sutterhealth.org
> CC: John.Clear@amd.com; sklise@hotmail.com; toasters@teaparty.net
>
> Steve,
>
> Supposedly it has been fixed in your release, but you might look at
> burt 459942. I ran across this on my 8.0.1 filers. They mostly
> seemed to be keeping time once running, but I found they always ran
> fast after a reboot. Usually about 3 minutes per reboot. The OS
> upgrades that are supposed to have it fixed still had the problem, but
> they managed to get in sync within ~5 minutes. It also mentions KB
> 1010058.
>
> You'll find that most of the timed options don't have any effect in 8.x anymore.
>
> Jeff
>
> On Tue, Nov 29, 2011 at 8:38 PM, Klise, Steve <klises@sutterhealth.org> wrote:
> > I will try that from a nix system.
> >
> >  I already tried to turn it off/on again.  Same thing, but thanks, I will try that tomorrow.
> >
> >
> > Regards
> >
> > Steve Klise
> >
> > Storage Engineer, NCDA
> >
> > __________________________
> >
> > PALO ALTO MEDICAL FOUNDATION
> >
> > SUTTER HEALTH INFORMATION SERVICES
> >
> > PENINSULA COASTAL REGION
> >
> >
> >
> > Office: 408-523-3163 · Fax: 408-328-1406
> >
> > e-mail: klises@sutterhealth.org<mailto:abouelj@sutterhealth.org>
> >
> >
> >
> >
> >
> >
> >
> > WARNING: "All e-mail sent to or from this address will be received or otherwise recorded by the Palo Alto Medical Foundation  e-mail system and is subject to archival, monitoring or review by, and/or disclosure to, someone other than the recipient."
> >
> >
> > ________________________________
> > From: toasters-bounces@teaparty.net [toasters-bounces@teaparty.net] On Behalf Of Clear, John [John.Clear@amd.com]
> > Sent: Tuesday, November 29, 2011 7:06 PM
> > To: steve klise; toasters@teaparty.net
> > Subject: RE: 8.0.2p3 NTP issue?
> >
> > NTP on 8.x seems to much more fragile than it was under 7.x.  It will often show as enabled, but not really be running, especially after network glitches.
> >
> > >From a unix box, run `ntpq -p FILER` and see if NTP is running.  If it isn’t, do options timed.enable off, and then on again.
> >
> > See https://kb.netapp.com/support/index?page=content&id=1012660 for more details.
> >
> > John
> >
> >
> >
> > From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of steve klise
> > Sent: Tuesday, November 29, 2011 4:31 PM
> > To: toasters@teaparty.net
> > Subject: 8.0.2p3 NTP issue?
> >
> > may have hit a bug, but support dosen't show anything yet...
> >
> > The time is off on an HA pair 3270's running DOT 8.0.2p3 7-mode.  I have other filers that have the same NTP settings and are in synch.  I had to manually set the time on these 3270's before I exceeded 5 minutes for my CIFS clients.
> >
> > Has anyone else noticed or dose anyone have any suggestions?
> >
> > Thanks
> >
> >
> > _______________________________________________
> > Toasters mailing list
> > Toasters@teaparty.net
> > http://www.teaparty.net/mailman/listinfo/toasters
>
>
>
> --
> Jeff Cleverley
> Unix Systems Administrator
> 4380 Ziegler Road
> Fort Collins, Colorado 80525
> 970-288-4611