Great! Thank you for your reply. I will relay this to my customer. Thanks again!
- Mitchell
"Documentation is like food. When it is good it is very very good, when it is bad it is better than nothing at all"
________________________________
From: Mike Wargel [mailto:mwargel@customstorage.com] Sent: Wednesday, August 08, 2007 4:24 PM To: Sojdehei, Mitchell; toasters@mathworks.com Subject: RE: Snapmirror serial execution?
See the syntax of the snapmirror.conf file. You can setup just like cron so that 1 runs on the 10s of each hour, 2 to run on the 15s, and the third to run at other times or other hours. I don't know of any way to setup to run one after the other and keep repeating. The initial will take a while to run, but incrementals should be short.
Mike
Mike Wargel Senior Systems Engineer Custom Storage, Inc 4300 N Miller Rd Suite 146 Scottsdale, AZ 85251 http://www.customstorage.com http://www.customstorage.com O: 480 941 4026, x101 F: 480 941 2605 C: 602 690 4788
________________________________
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Sojdehei, Mitchell Sent: Wednesday, August 08, 2007 4:10 PM To: toasters@mathworks.com Subject: Snapmirror serial execution?
Is there a way to make NetApp snapmirror updates run in serial? In other words, if I setup 3 snapmirror relationships, how can I get the first one to run, and then run the second one as soon as the first finishes, and then the third in the same fashion?
I want to try and avoid using cronjobs from an external server.
- Mitchell
"Documentation is like food. When it is good it is very very good, when it is bad it is better than nothing at all"