See the syntax of the
snapmirror.conf file. You can setup just like cron so that 1 runs on the
10s of each hour, 2 to run on the 15s, and the third to run at other times or
other hours. I don’t know of any way to setup to run one after the other and
keep repeating. The initial will take a while to run, but incrementals should be
short.
Mike
Mike
Wargel
Senior Systems
Engineer
Custom Storage,
Inc
Suite
146
http://www.customstorage.com
O: 480 941 4026,
x101
F: 480 941 2605
C: 602 690 4788
From:
owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Sojdehei, Mitchell
Sent: Wednesday, August 08, 2007 4:10
PM
To:
toasters@mathworks.com
Subject:
Snapmirror serial execution?
Is there a
way to make NetApp snapmirror updates run in serial? In other words, if I
setup 3 snapmirror relationships, how can I get the first one to run, and then
run the second one as soon as the first finishes, and then the third in the same
fashion?
I want to
try and avoid using cronjobs from an external
server.
- Mitchell
"Documentation is like food.
When it is good it is very very good, when it is bad it is better than nothing
at all"