NO NO NO...
You only need to install the 7.2.2 (if in fact you are running 7.2.3)
Then download then reboot.
No need for revert_to
--tmac
On Dec 10, 2007 9:46 AM, Bob Doho bob.doho@gmail.com wrote:
Hi Giacomo,
To revert to 7.2.2 you first need to do a "download" en then use the "revert_to 7.2.2" command before rebooting your filer.
On Dec 10, 2007 2:39 PM, Milazzo Giacomo G.Milazzo@sinergy.it wrote:
Hi All
Maybe is a simple question for most of you but I've never done before
and I
want to be sure J
I'm going to revert a 6030HA from 7.2.3 to 7.2.2 for Snapmirror (bidirectional) compliance to another 6030HA system already running
7.2.2
I've seen times ago a similar operation performed from a 7.2 to a 7.1and I remember some special command to apply after the unzip/download phase of
the
preceding Data Ontap release.
Is it so? I mean, there are special commands on cli or should I simply
unzip
the 7.2.2, living them the "download" command and a reboot as an
"upgrade"?
Or is there something other.
My 6030HA is a NEW system, no volumes or other aggregate other that the aggr0/vol0 for the os
Regards