thanks Jeff,
The -mode check just completed - took 45 minutes - sysstat -x 1 did not show any increase
Upgrading a volume to 64-bit consumes additional free space in the volume. The following table shows the space usage after each volume is upgraded to 64-bit:
Volume Name Total Used Available Capacity ----------- ----- ---- --------- -------- vol0 300GB 73GB 226GB 24% fcappdata 1536GB 688GB 847GB 44% backup 20GB 4210MB 15GB 20% backup1 3660GB 1941GB 1719GB 53% backup2 60GB 45GB 14GB 75% appdata 2252GB 1986GB 266GB 88% irtdev 70GB 56GB 13GB 80% vm65 3481GB 3193GB 288GB 91% devapp1 30GB 2112MB 27GB 6%
I might grow the vm65 volume before attempting the grow-all
thanks
On Mar 19, 2013, at 9:13 PM, Jeff Cleverley jeff.cleverley@avagotech.com wrote:
I did it on a NearStore running 8.1. It worked fine. I didn't really keep track of how long it took since it did it in the background.
Jeff
On Tue, Mar 19, 2013 at 9:50 PM, Fletcher Cocquyt fcocquyt@stanford.edu wrote:
Again in the position where my source aggregate is 32 bit and destination is 64 bit and this prevents vfiler online migration.
Last year this was a priv set diag command
aggr 64bit-upgrade start aggr1 -mode grow-all
http://www.gossamer-threads.com/lists/netapp/toasters/11820
In test mode, this completed the 64 bit upgrade quickly and without error.
Anyone done this in production? (Ontap 8.1)
thanks
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
-- Jeff Cleverley Unix Systems Administrator 4380 Ziegler Road Fort Collins, Colorado 80525 970-288-4611