thanks Jeff,

The -mode check just completed - took 45 minutes - sysstat -x 1 did not show any increase

Upgrading a volume to 64-bit consumes additional free space in the volume. The

following table shows the space usage after each volume is upgraded to 64-bit:

Volume Name Total Used Available Capacity

----------- ----- ---- --------- --------

vol0 300GB 73GB 226GB 24%

fcappdata 1536GB 688GB 847GB 44%

backup 20GB 4210MB 15GB 20%

backup1 3660GB 1941GB 1719GB 53%

backup2 60GB 45GB 14GB 75%

appdata 2252GB 1986GB 266GB 88%

irtdev 70GB 56GB 13GB 80%

vm65 3481GB 3193GB 288GB 91%

devapp1 30GB 2112MB 27GB 6%

I might grow the vm65 volume before attempting the grow-all

thanks

On Mar 19, 2013, at 9:13 PM, Jeff Cleverley <jeff.cleverley@avagotech.com> wrote:

I did it on a NearStore running 8.1. It worked fine. I didn't really
keep track of how long it took since it did it in the background.

Jeff

On Tue, Mar 19, 2013 at 9:50 PM, Fletcher Cocquyt <fcocquyt@stanford.edu> wrote:
Again in the position where my source aggregate is 32 bit and destination is
64 bit and this prevents vfiler online migration.

Last year this was a priv set diag command

aggr 64bit-upgrade start aggr1 -mode grow-all

http://www.gossamer-threads.com/lists/netapp/toasters/11820

In test mode, this completed the 64 bit upgrade quickly and without error.

Anyone done this in production? (Ontap 8.1)

thanks

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters

--
Jeff Cleverley
Unix Systems Administrator
4380 Ziegler Road
Fort Collins, Colorado 80525
970-288-4611