Thank you, I dont want to start without a precheck, I am afraid for space constrains.I did check the KB as well before I posted and TR before posting, something got broken in my version, in clearly does not want to run a check http://www.netapp.com/us/media/tr-3978.pdf
How to perform 64-bit aggregate conversion using CLI in Data ONTAP 7-Mode and clustered Data ONTAP
| | | How to perform 64-bit aggregate conversion using CLI in Data ONTAP 7-Mode and clustered Data ONTAP | |
|
On Tuesday, May 23, 2017 8:18 PM, Jonathon Lanzon jonathon@lanzon.org wrote:
Hi, Referring to https://library.netapp.com/ecmdocs/ECMP1511537/html/man1/na_aggr.1.html; "check" is definitely an option for 8.2.4 7-mode. Your experience is odd, because from the KB article at https://kb.netapp.com/support/s/article/ka31A00000013WlQAI/how-to-perform-64..., it shows the "check" command being valid without specifying additional disks. You only need to specify disks when used with the "normal" tag. Something that might help you is from DoT 8.2.1 Netapp added in-place expansion procedure for 32-bit aggregates to 64-bit improved without requiring additional disks. Have you tried doing this instead? The command would be:> aggr 64bit-upgrade start Aggr1 Have a look at the TR document for more info on this: http://www.netapp.com/us/media/tr-3978.pdf. -JL On 24 May 2017 at 08:40, Iluhes iluhes@yahoo.com wrote:
Hi Folks,NetApp Release 8.2.4P6 7-Mode Running #aggr add Aggr1 -64bit-upgrade check aggr add: Neither a count of disks nor a list of disks to addto the aggregate was specified.
Running with # of disk seem to be also not running check #aggr add Aggr1 -64bit-upgrade check 6 Note: preparing to add 4 data disks and 2 parity disks.Continue? ([y]es, [n]o, or [p]review RAID layout) p Is "check" no longer an option in 8.2.4?
| | Virus-free. www.avast.com |
______________________________ _________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/ mailman/listinfo/toasters