Thank you, I dont want to start without a precheck, I am afraid for space constrains.
I did check the KB as well before I posted and TR before posting, something got broken in my version, in clearly does not want to run a check
On Tuesday, May 23, 2017 8:18 PM, Jonathon Lanzon <jonathon@lanzon.org> wrote:
Hi,
Referring to https://library.netapp.com/ecmdocs/ECMP1511537/html/man1/na_aggr.1.html; "check" is definitely an option for 8.2.4 7-mode.
Your experience is odd, because from the KB article at https://kb.netapp.com/support/s/article/ka31A00000013WlQAI/how-to-perform-64-bit-aggregate-conversion-using-cli-in-data-ontap-7-mode-and-clustered-data-ontap?language=en_US, it shows the "check" command being valid without specifying additional disks. You only need to specify disks when used with the "normal" tag.
Something that might help you is from DoT 8.2.1 Netapp added in-place expansion procedure for 32-bit aggregates to 64-bit improved without requiring additional disks. Have you tried doing this instead? The command would be:
> aggr 64bit-upgrade start Aggr1
Have a look at the TR document for more info on this: http://www.netapp.com/us/media/tr-3978.pdf.
-JL
On 24 May 2017 at 08:40, Iluhes <iluhes@yahoo.com> wrote:
Hi Folks,NetApp Release 8.2.4P6 7-ModeRunning#aggr add Aggr1 -64bit-upgrade checkaggr add: Neither a count of disks nor a list of disks to addto the aggregate was specified.Running with # of disk seem to be also not running check#aggr add Aggr1 -64bit-upgrade check 6Note: preparing to add 4 data disks and 2 parity disks.Continue? ([y]es, [n]o, or [p]review RAID layout) pIs "check" no longer an option in 8.2.4?
______________________________ _________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/ mailman/listinfo/toasters
