It sounds like someone else may be working that already. If they get one approved we may be able to piggy back on that.
Thanks,
Jeff
On Tue, Sep 3, 2013 at 2:04 PM, tmac tmacmd@gmail.com wrote:
Ask for a PVR from NetApp. The card with removable optics should support the LRs, NetApp would just needed to support the driver. On Sep 3, 2013 3:56 PM, "Jeff Cleverley" jeff.cleverley@avagotech.com wrote:
We're looking at having multiple connections per filer going to a switch in each room to remove the switch as a single point of failure. The single mode cabling will most likely be more compatible with 40G and 100G networking in the next few years.
Jeff
On Tue, Sep 3, 2013 at 1:05 PM, tmac tmacmd@gmail.com wrote:
Why not use SR optics from the NetApp to the switch (supported by netapp) And then LR optics between switches?
--tmac
*Tim McCarthy* *Principal Consultant*
Clustered ONTAP Clustered ONTAPNCDA ID: XK7R3GEKC1QQ2LVD RHCE6 110-107-141https://www.redhat.com/wapps/training/certification/verify.html?certNumber=110-107-141&isSearch=False&verify=Verify NCSIE ID: C14QPHE21FR4YWD4 Expires: 08 November 2014 Current until Aug 02, 2016 Expires: 08 November 2014
On Tue, Sep 3, 2013 at 2:57 PM, Jeff Cleverley < jeff.cleverley@avagotech.com> wrote:
Greetings,
We are looking at upgrading and changing our network architecture. One option would be to use LR GBIC with single mode fibre. This appears to require non-NetApp GBIC which I'm sure makes it unsupported.
Is anyone doing this, and if so, which parts are you using and what issues have you run into?
Thanks,
Jeff
-- Jeff Cleverley Unix Systems Administrator 4380 Ziegler Road Fort Collins, Colorado 80525 970-288-4611
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
-- Jeff Cleverley Unix Systems Administrator 4380 Ziegler Road Fort Collins, Colorado 80525 970-288-4611