Ask for a PVR from NetApp.
The card with removable optics should support the LRs, NetApp would just needed to support the driver.

On Sep 3, 2013 3:56 PM, "Jeff Cleverley" <jeff.cleverley@avagotech.com> wrote:

We're looking at having multiple connections per filer going to a switch in each room to remove the switch as a single point of failure.  The single mode cabling will most likely be more compatible with 40G and 100G networking in the next few years. 

Jeff

On Tue, Sep 3, 2013 at 1:05 PM, tmac <tmacmd@gmail.com> wrote:

Why not use SR optics from the NetApp to the switch (supported by netapp)

And then LR optics between switches?

--tmac

Tim McCarthy

Principal Consultant

          

        Clustered ONTAP                                                        Clustered ONTAP

 NCDA ID: XK7R3GEKC1QQ2LVD           RHCE6 110-107-141           NCSIE ID: C14QPHE21FR4YWD4

     Expires: 08 November 2014              Current until Aug 02, 2016         Expires: 08 November 2014

On Tue, Sep 3, 2013 at 2:57 PM, Jeff Cleverley <jeff.cleverley@avagotech.com> wrote:

Greetings,

We are looking at upgrading and changing our network architecture.  One option would be to use LR GBIC with single mode fibre.  This appears to require non-NetApp GBIC which I'm sure makes it unsupported.

Is anyone doing this, and if so, which parts are you using and what issues have you run into?

Thanks,

Jeff

--
Jeff Cleverley
Unix Systems Administrator
4380 Ziegler Road
Fort Collins, Colorado 80525
970-288-4611

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters

--
Jeff Cleverley
Unix Systems Administrator
4380 Ziegler Road
Fort Collins, Colorado 80525
970-288-4611