2 Feb
2000
2 Feb
'00
2:56 p.m.
Hej Erik,
On Wed, 2 Feb 2000, Erik Ahlstrom wrote:
You should use an null-modem kable or X-tp cable trough RJ45 - DB-9, and make sure that you are using Software hand-shake, ie, xon-xoff.
I'm using this config and it works fine for me.
What's the spec for a null-modem cable? I've been using a roll-over cable which maps pins 1-8 onto 8-1 or a straight-through cable.
Is an X-tp the same as a cross-over ethernet cable? (ie swap 1, 2 and 3, 6)?
MvH,
-Ronan