command are : << *storage disable adapter adapter_num*
followed by : << *storage enable adapter adapter_num*.
u must be in DOT 6.4 or greater. For details, see : http://now.netapp.com/Knowledgebase/solutionarea.asp?id=ntapcs2393&resou...
Toal, Dave wrote:
A while ago, someone posted a command to rescan an FC bus, I believe. I've got a dlt 7000 on an F740; the dlt is inside a storagetek 9710 which was recently ipl'd. The dlt stops working when this happens, I'm not sure why (veritas netbackup shows it as 'down'). Rebooting the netapp fixes it; is there a way to reset the adapter on the dlt without doing that?
statler*> fcadmin rescan 1 fcadmin rescan: Channel 1 is not a FC loop channel.
statler*> sysconfig -v NetApp Release 6.1.3R2: Mon Jun 17 01:40:16 PDT 2002
slot 1: SCSI Host Adapter 1 (Qlogic ISP 1040B) Fast/Wide, Differential Firmware Version 4.66.00 Clock Rate 60MHz. 0: Tape: Quantum DLT7000 276A-- this is not a .sig