There are no drawbacks at all, clients only see what you export, and you shouldnt be exporting /vol/vol0 by itself to your clients..but creating directories or qtrees inside there for your clients to play in.
The volume-to-spindle contention issues dont apply on a Filer the way you probly see them in a UFS/NT environment.
The only pro to separate..is you can use advanced tools/utilities like SnapRestore to backdate an entire volume, without affecting the boot volume.
Adding shelves is trivial, and done properly doesnt even require a shutdown (RTFM before you even think 'bout it tho). And you can vol copy your boot to somewhere else, make it the boot volume, and go from there, but the only way to shrink a volume is to destroy it and rebuild it.
Your VIF question..I dont follow. You have a single VIF using two ports. You dont need two hostnames for the two ports, because in a VIF they appear as one..same IP and hostname. You dont need to do anything with DNS, just forget they are two RJ45 connections..and see them as a 200Mbit single port. The VIF is at layer-2..and nothing above that needs adjusted to use it properly once the switch is configured. The main IP of the netapp..IS both ports acting as one assuming you only are using the VIF for connectivity.
:-----Original Message----- :From: Timothy Demarest [mailto:demarest@arraycomm.com] :Sent: Wednesday, March 22, 2000 10:14 PM :To: toasters@mathworks.com :Subject: VIF and Volume Questions : : :Hello All: : :I have two questions: : :I am setting up a new F740. When I ordered the unit, I slightly :underestimated the number of disks required for our storage :requirements. Essentially, I forgot that the boot volume :requires two disks. What are the drawbacks to using the root/boot :volume for other data, such as home directories? I have enough :disks to create volumes & qtrees for other stuff, but am interested :in the pros/cons of NOT keeping the root/boot volume segragated :form other data. How do you have your volumes/qtrees setup? Is it :easy to add another shelf and disks later, and volcopy /vol/vol0 :to a new volume, then reduce the number of disks in the boot volume? : :Second, I have VIF working on a C5500. The first interface is named :f740-eng0, and the second f740-eng1. The VIF is named vifeng. What :should I be using in the DNS for the name of the F740? Do I create :a CNAME for the unit that points to the main IP for the F740? : :Thanks for your help. : :Tim : :-- :Timothy Demarest ArrayComm, Inc. :demarest@arraycomm.com 2480 N. 1st Street, Suite 200 :http://www.arraycomm.com San Jose, CA 95131 :