We may be experiencing your item 3 below. I have a case open with Netapp but have yet to really work on it.
Our experience with e0M on a new 3140 is that when you ssh to that interface, we are place directly into what I would consider the system console and we don't currently know how to get back to the actual rlm interface. We've tried to reboot that rlm. If I hear anything on our case I can post our solution. I'm curious, are you experiencing the same issue with your e0m interface? Our serial port to the rlm seems to be fine, meaning we can utilize the rlm interface cli as well as access the system console and then get back to the rlm interface. This new 3140 replaced a 3020.
Thanks, Kevin
At 09:05 AM 6/14/2010, you wrote:
Hi,
we recently acquired two filers (3140) with DS4243 shelves, and upgraded them to ONTAP 8.0. I know that this is a GA release, but I did notice some glitches (which are perfectly understandable), and have some questions for the people here who understand this better than me :
- installing the 8.0 doc yields a "Documentation for Data ONTAPTM 8.0
is installed, but is out-of-date." message ;
- I couldn't find any firmware updates for the DS4243 shelves on NOW --
is this normal? ;
- we configured the e0M interface (and I think that it is a great
idea), but I couldn't find a way to configure the filer to exclusively be administrated through e0M (i.e. the embedded SSH server now answers on both interfaces) ;
- since we migrated from a 7.x release, our root volumes are on 32-bit
aggregates -- is there a way to have the root volume on a 64-bit aggregate (and if not, what is the technical reason for it) ?
Do some of you have encountered the same questions ?
Regards, Simon --
Simon Vallet Ingénieur systèmes, réseaux, sécurité CEA DSV/IG/GEN - Genoscope Tél.: +33 1 60 87 36 06 Mél.: sjv@genoscope.cns.fr