We may be experiencing your item 3 below. I have a
case open with Netapp but have yet to really work on it.
Our experience with e0M on a new 3140 is that when you ssh to that
interface, we are place directly into what I would consider the system
console and we don't currently know how to get back to the actual rlm
interface. We've tried to reboot that rlm. If I hear anything
on our case I can post our solution. I'm curious, are you
experiencing the same issue with your e0m interface? Our serial
port to the rlm seems to be fine, meaning we can utilize the rlm
interface cli as well as access the system console and then get back to
the rlm interface. This new 3140 replaced a 3020.
Thanks, Kevin
At 09:05 AM 6/14/2010, you wrote:
Hi,
we recently acquired two filers (3140) with DS4243 shelves, and
upgraded
them to ONTAP 8.0. I know that this is a GA release, but I did
notice
some glitches (which are perfectly understandable), and have some
questions for the people here who understand this better than me
:
- installing the 8.0 doc yields a "Documentation for Data ONTAPTM
8.0
is installed, but is out-of-date." message ;
- I couldn't find any firmware updates for the DS4243 shelves on NOW
--
is this normal? ;
- we configured the e0M interface (and I think that it is a great
idea), but I couldn't find a way to configure the filer to
exclusively be administrated through e0M (i.e. the embedded
SSH
server now answers on both interfaces) ;
- since we migrated from a 7.x release, our root volumes are on
32-bit
aggregates -- is there a way to have the root volume on a
64-bit
aggregate (and if not, what is the technical reason for it)
?
Do some of you have encountered the same questions ?
Regards,
Simon
--
Simon Vallet
Ingénieur systèmes, réseaux, sécurité
CEA DSV/IG/GEN - Genoscope
Tél.: +33 1 60 87 36 06
Mél.: sjv@genoscope.cns.fr