Hey,
thanks, these are also all OK as far as I can tell.
NETAPPCLUSTER::> fru-check show (system fru-check show) Node FRU Status ------------------ ---------------------------- ----------- netapp01 DIMM-2 pass DIMM-1 pass Boot Media pass PCIe Devices pass netapp02 DIMM-1 pass DIMM-2 pass Boot Media pass PCIe Devices pass 8 entries were displayed.
NETAPPCLUSTER::> system chassis fru show
Chassis ID FRU Type State Nodes Sharing the FRU ------------------- ---------- -------- ----------- ----------------------- 021628016912 netapp01 controller ok netapp01 021628016912 netapp02 controller ok netapp02 021628016912 PSU2 FRU psu GOOD netapp02, netapp01 021628016912 PSU1 FRU psu GOOD netapp02, netapp01 4 entries were displayed.
NETAPPCLUSTER::> system controller fru show Node FRU Name Subsystem Status ------------------ ---------------------------- ------------------ ----------- netapp01 PSU2 FRU Environment ok PSU1 FRU Environment ok DIMM-2 Memory ok DIMM-1 Memory ok BootMedia Motherboard ok netapp02 PSU2 FRU Environment ok PSU1 FRU Environment ok DIMM-1 Memory ok DIMM-2 Memory ok BootMedia Motherboard ok 10 entries were displayed.
NETAPPCLUSTER::>
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: jordan slingerland [mailto:jordan.slingerland@gmail.com] Gesendet: Mittwoch, 14. Dezember 2016 22:27 An: Alexander Griesser AGriesser@anexia-it.com Cc: toasters@teaparty.net Betreff: Re: System attention LED
Should be a fru_led command or similar.
On Dec 14, 2016 4:22 PM, "Alexander Griesser" <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> wrote: Hi there,
I have two filers (1x FAS2240 and 1x FAS2650) and both have the system attention LED lit and I have no idea why. `System health status show` as well as config advisor are both A-OK and there are no visible indicators why this LED is still lit.
Any idea how to find out the root cause of this LED on the front bezel or how I can check or maybe reset the status of the LED through CLI?
Thanks,
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
_______________________________________________ Toasters mailing list Toasters@teaparty.netmailto:Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters