Hey,
thanks, these are also all OK as far as I can tell.
NETAPPCLUSTER::> fru-check show
(system fru-check show)
Node FRU Status
------------------ ---------------------------- -----------
netapp01
DIMM-2 pass
DIMM-1 pass
Boot Media pass
PCIe Devices pass
netapp02
DIMM-1 pass
DIMM-2 pass
Boot Media pass
PCIe Devices pass
8 entries were displayed.
NETAPPCLUSTER::> system chassis fru show
Chassis ID FRU Type State Nodes Sharing the FRU
------------------- ---------- -------- ----------- -----------------------
021628016912 netapp01 controller
ok netapp01
021628016912 netapp02 controller
ok netapp02
021628016912 PSU2 FRU psu GOOD netapp02, netapp01
021628016912 PSU1 FRU psu GOOD netapp02, netapp01
4 entries were displayed.
NETAPPCLUSTER::> system controller fru show
Node FRU Name Subsystem Status
------------------ ---------------------------- ------------------ -----------
netapp01
PSU2 FRU Environment ok
PSU1 FRU Environment ok
DIMM-2 Memory ok
DIMM-1 Memory ok
BootMedia Motherboard ok
netapp02
PSU2 FRU Environment ok
PSU1 FRU Environment ok
DIMM-1 Memory ok
DIMM-2 Memory ok
BootMedia Motherboard ok
10 entries were displayed.
NETAPPCLUSTER::>
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail:
AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: jordan slingerland [mailto:jordan.slingerland@gmail.com]
Gesendet: Mittwoch, 14. Dezember 2016 22:27
An: Alexander Griesser <AGriesser@anexia-it.com>
Cc: toasters@teaparty.net
Betreff: Re: System attention LED
Should be a fru_led command or similar.
On Dec 14, 2016 4:22 PM, "Alexander Griesser" <AGriesser@anexia-it.com> wrote:
Hi there,
I have two filers (1x FAS2240 and 1x FAS2650) and both have the system attention LED lit and I have no idea why.
`System health status show` as well as config advisor are both A-OK and there are no visible indicators why this LED is still lit.
Any idea how to find out the root cause of this LED on the front bezel or how I can check or maybe reset the status of the LED through CLI?
Thanks,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters