You can still ndmpcopy just a directory. Give it a path like /vol/root/etc will just copy the etc directory. Try /vol/root/.snapshot/hourly.0/etc/ that should work.
-Blake
On Tue, Jun 3, 2008 at 9:48 PM, Steve Rieger lists@up-south.com wrote:
Ndmcopy is volume level, i need to copy a napshot. The vol is alive.
I mounted the snapshot and am using scp to copy it to dest filer.
Sent via BlackBerry from T-Mobile
-----Original Message----- From: "Blake Golliher" thelastman@gmail.com
Date: Tue, 3 Jun 2008 21:30:39 To:"Mailing Lists" lists@up-south.com Cc:"Fox, Adam" Adam.Fox@netapp.com, toasters@mathworks.com Subject: Re: snapshot copy
ndmpcopy might work. It's filer to filer, and works fairly well, unless your problem is regarding a lot of files. It'll work well enough for a few thousand, but getting into several million it gets a bit nasty, but then any file based replication method for millions of files tends to suck.
It doesn't need a license, and is trival to setup and use on the filer console.
-Blake
On Tue, Jun 3, 2008 at 3:14 PM, Mailing Lists lists@up-south.com wrote:
On Tue, Jun 3, 2008 at 3:05 PM, Fox, Adam Adam.Fox@netapp.com wrote:
If you can take the data down for a single pass, then vol copy is pretty easy. If not, and you have a SnapMirror license, you could do your first pass while the data is being accessed, then do an incremental while it's down.
This assumes that you have the same volume type (trad/flex) on each side. If not, you'll have to use a more logical way of moving data like ndmpcopy or Qtree-based SnapMirror.
-- Adam Fox adamfox@netapp.com
snapmirror is not an option,
thanx though,