Just keep in mind, that
source:/vol/volXXX/- destination:/vol/volXXX/qtree
copies everything that is NOT in a qtree. If there's qtrees in your source you might want to mention them separately also. Alternatively you could use
source:/vol/volXXX destination:/vol/volXXX/qtree
which would replicate everything, but then whatever qtrees you might have had at the destination will be just regular directories at the destination (not good for restore...)
Sebastian
On 2/17/2014 10:11 PM, Iluhes wrote:
Thanks Richard for suggestions!
source:/vol/volXXX/- destination:/vol/volXXX/qtree
On Monday, February 17, 2014 3:09 PM, Iluhes iluhes@yahoo.com wrote: Can I snapmirror "Everything" in the volume into a qtree?
filer7.3.5:/vol/VOL1/- --> filer8.2:/vol/qtree/
On Monday, February 17, 2014 2:48 PM, "Payne, Richard" richard.payne@amd.com wrote: You cannot snapmirror a volume to a qtree, no (at least not that I’ve ever heard of). You can do volume to volume or qtree to qtree (and you can do data **not** in a qtree to qtree). If your source is 7.3 and the destination is 8.2 I’m fairly certain you can do a VSM from 32 to 64-bit volumes (added in 8.1 IIRC). --rdp *From:*Iluhes [mailto:iluhes@yahoo.com] *Sent:* Monday, February 17, 2014 3:44 PM *To:* Payne, Richard; Jordan Slingerland; Toasters *Subject:* Re: Snammirror question Can I snapmirror from volume into qtree? Source is 32-bit volume and destination is qtree on 64-bit volume 7.3.5->8.2 On Monday, February 17, 2014 2:42 PM, "Payne, Richard" <richard.payne@amd.com mailto:richard.payne@amd.com> wrote: For QSM (qtree snapmirror) the versions don’t really matter. You can snapmirror new->old, old->new. For Volume snapmirror the destination has to be the same or newer. I know we have 8.1 as the source and 8.0 as the destination for QSM. --rdp *From:*toasters-bounces@teaparty.net mailto:toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] *On Behalf Of *Jordan Slingerland *Sent:* Monday, February 17, 2014 3:37 PM *To:* Iluhes; Toasters *Subject:* RE: Snammirror question Maybe someone can confirm if there is an exact version requirement as 7.3.5 is pretty old, but I believe QSM should work from older to Newer, but def not the other way around. --JMS *From:*toasters-bounces@teaparty.net mailto:toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] *On Behalf Of *Iluhes *Sent:* Monday, February 17, 2014 3:32 PM *To:* Toasters *Subject:* Snammirror question Can I snapmirror between the following source and destination Source: 7.3.5.1P3 Destination: 8.2P3 From 32-bit volume into 64-bit qtree?
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters