Just keep in mind, that

source:/vol/volXXX/-    destination:/vol/volXXX/qtree

copies everything that is NOT in a qtree.
If there's qtrees in your source you might want to mention them separately also.
Alternatively you could use

source:/vol/volXXX    destination:/vol/volXXX/qtree

which would replicate everything, but then whatever qtrees you might have had at the destination will be just regular directories at the destination (not good for restore...)

Sebastian
On 2/17/2014 10:11 PM, Iluhes wrote:
Thanks Richard for suggestions!

source:/vol/volXXX/-     destination:/vol/volXXX/qtree



On Monday, February 17, 2014 3:09 PM, Iluhes <iluhes@yahoo.com> wrote:
Can I snapmirror "Everything" in the volume into a qtree?

filer7.3.5:/vol/VOL1/-        -->     filer8.2:/vol/qtree/


On Monday, February 17, 2014 2:48 PM, "Payne, Richard" <richard.payne@amd.com> wrote:
You cannot snapmirror a volume to a qtree, no (at least not that I’ve ever heard of).
 
You can do volume to volume or qtree to qtree (and you can do data *not* in a qtree to qtree).
 
If your source is 7.3 and the destination is 8.2 I’m fairly certain you can do a VSM from 32 to 64-bit volumes (added in 8.1 IIRC).
 
--rdp
 
From: Iluhes [mailto:iluhes@yahoo.com]
Sent: Monday, February 17, 2014 3:44 PM
To: Payne, Richard; Jordan Slingerland; Toasters
Subject: Re: Snammirror question
 
Can I snapmirror from volume into qtree?
Source is 32-bit volume and destination is qtree on 64-bit volume
7.3.5->8.2
 
On Monday, February 17, 2014 2:42 PM, "Payne, Richard" <richard.payne@amd.com> wrote:
For QSM (qtree snapmirror) the versions don’t really matter. You can snapmirror new->old, old->new. For Volume snapmirror the destination has to be the same or newer.
 
I know we have 8.1 as the source and 8.0 as the destination for QSM.
 
--rdp
 
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Jordan Slingerland
Sent: Monday, February 17, 2014 3:37 PM
To: Iluhes; Toasters
Subject: RE: Snammirror question
 
Maybe someone can confirm if there is an exact version requirement as 7.3.5 is pretty old, but I believe QSM should work from older to Newer, but def not the other way around.
 
--JMS
 
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Iluhes
Sent: Monday, February 17, 2014 3:32 PM
To: Toasters
Subject: Snammirror question
 
Can I snapmirror between the following source and destination
 
Source:  7.3.5.1P3
Destination:  8.2P3
From 32-bit volume into 64-bit       qtree?
 






_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters