Now, carefully look at that list! In a HA environment, there should be only two IDs listed for owners. Of course, only one number for a single controller.
If you have more than the expected number, then that is why they are not showing. Why not post the "disk show -v" to the list so we can see?
--tmac
*Tim McCarthy* *Principal Consultant*
On Fri, Feb 26, 2016 at 6:48 AM, Mark Flint mf1@sanger.ac.uk wrote:
Apologies, I replied directly to the people who’d suggested it. Have run disk show –v, and yes, it shows all 350 disks. As does environment status shelf……….
Thanks,
Mark
From: "andrei.borzenkov@ts.fujitsu.com" andrei.borzenkov@ts.fujitsu.com Date: Friday, 26 February 2016 at 10:34 To: Mark Flint mf1@sanger.ac.uk, Brad Thompson < brad.thompson877@gmail.com> Cc: "toasters@teaparty.net" toasters@teaparty.net Subject: RE: 3170 issue
“unowned” is not the same as “not owned by current controller”. Other disks are owned by some other controller, so they are not shown by “disk show -n”. Any reason you won’t use “disk show -v” as suggested twice already?
With best regards
*Andre**i** Borzenkov*
Senior system engineer
FTS WEMEAI RUC RU SC TMS FOS
[image: cid:image001.gif@01CBF835.B3FEDA90]
*FUJITSU*
Zemlyanoy Val Street, 9, 105 064 Moscow, Russian Federation
Tel.: +7 495 730 62 20 ( reception)
Mob.: +7 916 678 7208
Fax: +7 495 730 62 14
E-mail: Andrei.Borzenkov@ts.fujitsu.com
Web: ru.fujitsu.com http://ts.fujitsu.com/
Company details: ts.fujitsu.com/imprint http://ts.fujitsu.com/imprint.html
This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation.
Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.
*From:* toasters-bounces@teaparty.net [ mailto:toasters-bounces@teaparty.net toasters-bounces@teaparty.net] *On Behalf Of *Mark Flint *Sent:* Friday, February 26, 2016 1:16 PM *To:* Brad Thompson *Cc:* toasters@teaparty.net *Subject:* Re: 3170 issue
It appears not, the disk show –n command brings nothing back.
:(
`Mark
*From: *Brad Thompson brad.thompson877@gmail.com *Date: *Friday, 26 February 2016 at 09:15 *To: *Mark Flint mf1@sanger.ac.uk *Cc: *"toasters@teaparty.net" toasters@teaparty.net *Subject: *Re: 3170 issue
Do you have unassigned disks? The "disk show" command will only show the disks that are assigned. If there are unassigned disks you would see a note at the bottom of that output stating how many disks are unowned. You can also see those unowned disks by using "disk show -n".
"disk show -v" will show you all of the disks, including those that are not assigned.
On Fri, Feb 26, 2016 at 4:00 AM, Mark Flint mf1@sanger.ac.uk wrote:
Hi all, I have a 3170 FAS, with 25 shelves of 1TB disk , 14 per shelf. I use the command storage show disk, and see al 350 disks, yet if I use the command disk show, I see one 242. Can anyone suggest what may be causing the difference in output?
Thanks,
Mark
Sent from my iPhone
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
