Apologies, I replied directly to the people who’d suggested it. Have run disk show –v, and yes, it shows all350 disks. As does environment status shelf……….
Thanks,
Mark
From: "andrei.borzenkov@ts.fujitsu.com" <andrei.borzenkov@ts.fujitsu.com>
Date: Friday, 26 February 2016 at 10:34
To: Mark Flint <mf1@sanger.ac.uk>, Brad Thompson <brad.thompson877@gmail.com>
Cc: "toasters@teaparty.net" <toasters@teaparty.net>
Subject: RE: 3170 issue
“unowned” is not the same as “not owned by current controller”. Other disks are owned by some other controller, so they are not shown by “disk show -n”. Any reason you won’t use “disk show -v” as suggested twice already?
---
With best regards
Andrei Borzenkov
Senior system engineer
FTS WEMEAI RUC RU SC TMS FOS
FUJITSU
Zemlyanoy Val Street, 9, 105 064 Moscow, Russian Federation
Tel.: +7 495 730 62 20 ( reception)
Mob.: +7 916 678 7208
Fax: +7 495 730 62 14
E-mail: Andrei.Borzenkov@ts.fujitsu.com
Web: ru.fujitsu.com
Company details: ts.fujitsu.com/imprint
This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation.
Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Mark Flint
Sent: Friday, February 26, 2016 1:16 PM
To: Brad Thompson
Cc: toasters@teaparty.net
Subject: Re: 3170 issue
It appears not, the disk show –n command brings nothing back.
:(
`Mark
From: Brad Thompson <brad.thompson877@gmail.com>
Date: Friday, 26 February 2016 at 09:15
To: Mark Flint <mf1@sanger.ac.uk>
Cc: "toasters@teaparty.net" <toasters@teaparty.net>
Subject: Re: 3170 issue
Do you have unassigned disks? The "disk show" command will only show the disks that are assigned. If there are unassigned disks you would see a note at the bottom of that output stating how many disks are unowned. You can also see those unowned disks by using "disk show -n".
"disk show -v" will show you all of the disks, including those that are not assigned.
On Fri, Feb 26, 2016 at 4:00 AM, Mark Flint <mf1@sanger.ac.uk> wrote:
Hi all, I have a 3170 FAS, with 25 shelves of 1TB disk , 14 per shelf. I use the command storage show disk, and see al 350 disks, yet if I use the command disk show, I see one 242. Can anyone suggest what may be causing the difference in output?
Thanks,
Mark
Sent from my iPhone
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters
