Hi All,
I installed a Library StorageTek L80 with one drive LTO2 Certance Ultrium 2 connected via SCSI LVD to Filer F840 with Ontap 6.4.3. This release does not support LTO 2 so I dynamically qualified a IBM Ultrium-TD2. Then I emulated Certance Ultrium 2 as IBM Ultrium-TD2 with success. But a error appears when I try to use LTO2 format (rst4a/h), wich is displayed but not recognized. Does someone suffer a similar issue? Thanks
bafiler01> mt -f rst4a status
Tue Nov 9 20:15:13 ART [scsi.cmd.checkCondition:error]: Device 2a.1: Check Cond
ition: CDB 0x15: Sense Data SCSI:illegal request - (0x5 - 0x26 0x0 0x0)(2).
Tape drive: CERTANCEULTRIUM 2
Status: ready, write enabled
Format: LTO-I tape only 100GB
fileno = 0 blockno = 0 resid = 0
bafiler01> sysconfig -t
Tape drive (2a.1) CERTANCEULTRIUM 2 emulates ULTRIUM-TD2
rst4l - rewind device, format is: LTO-I tape only 100GB
nrst4l - no rewind device, format is: LTO-I tape only 100GB
urst4l - unload/reload device, format is: LTO-I tape only 100GB
rst4m - rewind device, format is: LTO-I tape 200GB cmp
nrst4m - no rewind device, format is: LTO-I tape 200GB cmp
urst4m - unload/reload device, format is: LTO-I tape 200GB cmp
rst4h - rewind device, format is: LTO-II tape only 200GB
nrst4h - no rewind device, format is: LTO-II tape only 200GB
urst4h - unload/reload device, format is: LTO-II tape only 200GB
rst4a - rewind device, format is: LTO-II tape 400GB cmp
nrst4a - no rewind device, format is: LTO-II tape 400GB cmp
urst4a - unload/reload device, format is: LTO-II tape 400GB cmp