Yes aggregates can of cause be shared between multiple SVMs…. (erhm… I think a little polite rtfm is in order here?) 😉 And before you ask, you cannot use the two aggr0 root aggregates for any data volumes…
/Heino
Fra: Toasters toasters-bounces@teaparty.net på vegne af "Rue, Randy" randyrue@gmail.com Dato: onsdag den 8. juli 2020 kl. 00.23 Til: tmac tmacmd@gmail.com Cc: Toasters toasters@teaparty.net Emne: Re: hardware or software based disk ownership?
I think I may just be looking at a limit of the system. If an aggregate is already assigned to one SVM, can it also be assigned to another? That is, can two different SVMs access the same aggregate?
Output:
netapp4::> vserver modify -vserver scharp_vm_storage -aggr-list scharpdata,scharp_vm_storage
netapp4::> vserver show Admin Operational Root Vserver Type Subtype State State Volume Aggregate ----------- ------- ---------- ---------- ----------- ---------- ---------- netapp4 admin - - - - - netapp4-a node - - - - - netapp4-b node - - - - - scharp_kube data default running running scharp_ scharpdata kube_root scharp_vm_storage data default running running scharp_vm_ scharp_vm_ storage_ storage root scharpdata data default running running scharpdata scharpdata _root 6 entries were displayed.
netapp4::> On 7/7/2020 2:06 PM, tmac wrote: Something may be getting lost here. Are you able to send any output?
--tmac
Tim McCarthy, Principal Consultant
Proud Member of the #NetAppATeamhttps://twitter.com/NetAppATeam
I Blog at TMACsRackhttps://tmacsrack.wordpress.com/
On Tue, Jul 7, 2020 at 4:47 PM Rue, Randy <randyrue@gmail.commailto:randyrue@gmail.com> wrote: I was misremembering from my early days in pre-cluster mode.
Forget any mention of disk ownership :)
Can an aggregate be used by more than one SVM? If so, how? When I try to add the aggregate to the other SVM, the command returns without error but vserver show still shows the SVMS and their assigned aggregates unchanged.
On 7/7/2020 12:10 PM, John Stoffel wrote:
Randy, Check your configuration, you need to assign the aggregates to the vservers.
https://library.netapp.com/ecmdocs/ECMP1196912/html/GUID-5255E7D8-F420-4BD3-...
shows you the steps to take.
vserver show -fields aggr-list vserver modify -vserver <vserver> -aggr-list <aggr1>,<aggr2>[,aggrN]John
_______________________________________________ Toasters mailing list Toasters@teaparty.netmailto:Toasters@teaparty.net https://www.teaparty.net/mailman/listinfo/toasters