toasters

toasters@lists.teaparty.net

13515 discussions

RESPOND IF YOU HAVE HAD A GOOD UNDERSTANDING OF WHAT YOU HAVE READ
by JEFFERSONbyrd＠tiscali.it 18 Oct '04

18 Oct '04

Subject- RE: HSBC Private Banking:Enquiry FROM: JEFFERSON BYRD I would respectfully request that you keep the contents of this mail confidential and respect the integrity of the information you come by as a result of this mail. I am contacting you independently of our investigation and no one is informed of this communication. I would like to brief you with certain facts that I believe would be of benefit to you. In 2000, Mr. John Brattle came to our bank to engage in business discussions with our private banking division. He informed us that he had a financial portfolio of 14.35 million United States Dollars, which he wished to have us invest on his behalf. I was the officer handling such transaction, I made numerous suggestions in line with my duties as the de-facto chief operations officer of the private banking sector, especially given the volume of funds he wished to put into our bank. We met on numerous occasions prior to any investments being placed.I encouraged him to consider various growth funds with prime ratings. The favored route in my advise to customers is to start by assessing data on 6000 traditional stocks and bond managers and 2000 managers of alternative investments. Based on my advice, We invested the money around various opportunities and made attractive margins for our first months of operation, the accrued profit and interest stood at over 16 million United States Dollars, this margin was not the full potential of the fund but he prefered low risk guaranteed returns on investments. In mid 2001, he asked that the money be liquidated because he needed to make an urgent investment requiring cash payments in the Netherlands. He directed that I liquidate the funds and had it deposited with a firm in the Netherlands. I informed him that HSBC would have to make special arrangements to have this done and in order not to circumvent due processes, the bank would have to make a 10.5 % deduction from the funds to cater for banking and statutory charges. He complained about the charges but later came around when I explained to him the complexities of the task he was asking of us. Cash movement across borders has become especially strict since the incidents of 9/11. I contacted my affiliate in Rotherdam and had the funds available in main land Europe. I undertook all the processes and made sure I followed his precise instructions to the letter and had the funds deposited at a Rotherdam based security and consultancy firm. This Asset Management firm is a specialised private firm that accepts deposits from high net worth individuals and blue chip corporations that handle valuable products or undertake transactions that need immediate access to cash. This small and highly private organization is familiar especially to the highly placed and well-connected organizations. In line with his instructions, the money was deposited with an Asset Management firm. Mr. John Brattle told me he wanted the money there in anticipation of his arrival from England later that week. This was the last communication we had, this transpired around 25th February 2003. In June later that year, we got a call from the Asset management firm informing us of the the inactivity of that particular portfolio. This was an astounding position as far as I was concerned, given the fact that I managed the private banking sector I was the only one who knew about the deposit at the firm, and I could not understand why Mr. John Brattle had not come forward to claim his deposit. All efforts to locate him was futile.I immediately passed the task of locating him to the internal investigations department of HSBC. Four days later, information started trickling in, apparently Mr. John Brattle was dead. A person who suited his description was declared dead of a heart attack in Canne, South of France. We were able to identify the body and cause of death was confirmed. The bank immediately launched an investigation into possible surviving next of kin to alert about the situation and also to come forward to claim his estate. If you are familiar with private banking affairs, those who patronize our services usually prefer anonymity, but also some levels of detachment from conventional processes. In his bio-data form, he listed no next of kin. In the field of private banking, opening an account with us means no one will know of its existence, accounts are rarely held under a name; depositors use numbers and codes to make the accounts anonymous. This bank also gives the choice to depositors of having their mail sent to them or held at the bank itself, ensuring that there are no traces of the account and as I said, rarely do they nominate next of kin. Private banking clients apart from not nominating next of kin also usually in most cases leave wills in our care, in this case; Mr. John Brattle died interstate. In line with our internal processes for account holders who have passed away, we instituted our own investigations in good faith to determine who should have right to claim the estate. This investigation has for the past months been unfruitful. We have scanned every continent and used our private investigation affiliate companies to get to the root of the problem. My official capacity dictates that I am the only party to supervise the investigation and the only party to receive the results of the investigation. According to practice, the Asset Management will by the end of this financial year broadcast a request for statements of claim to HSBC, failing to receive viable claims they will most probably revert the deposit back to HSBC. This will result in the money entering the HSBC accounting system and the portfolio will be out of my hands and out of the private banking division. This will not happen if I have my way. What I wish to relate to you might sound unethical practice but I want you to understand something. It is only an outsider to the banking world who finds the internal politics of the banking world aberrational. The world of private banking especially is fraught with huge rewards for those who occupy certain offices and oversee certain portfolios. There is US$ 14.35,000,000.00 deposited in Rotherdam, The Netherlands, I alone have the deposit details and they will release the deposit to no one unless I instruct them to do so. I alone know of the existence of this deposit for as far as HSBC is concerned, the transaction with Mr. John Brattle concluded when I sent the funds to Rotherdam, all outstanding interactions in relation to the file are just customer services and due process. The Asset Management has no single idea of the history or nature of the deposit. They are simply awaiting instructions to release the deposit to any party that comes forward. This bank has spent great amounts of money trying to track this man?s family; they have investigated for months and have found no family. The investigation has come to an end. My proposal; you share similar details to the late fellow; I am prepared to place you in a position to instruct the Asset Management firm to release the deposit to you as the closest surviving relation. Upon receipt of the deposit, I am prepared to share the money with you in half. That is: I will simply nominate you as the next of kin and have them release the deposit to you. We share the proceeds 50/50. I would have gone ahead to ask that the funds be released to me, but that would have drawn a straight line to me and my involvement in claiming the deposit. I can assure you that I could have the deposit released to you within a few days. I will simply inform the bank of the final closing of the file relating to Mr. John Brattle I will then officially communicate with the Asset Management firm and instruct them to release the deposit to you. With these two things: all is done. The alternative would be for us to have the firm direct the funds to another bank with you as account holder. This way there will be no need for you to think of receiving the money from the firm Management We can fine-tune this based on our interactions. If you find yourself able to work with me, contact me through the provided email account. If you give me positive signals, I will initiate this process towards a successful conclusion. . Please send your response to jeffersonbyrd(a)mail2world.com If we can be of one accord, we should plan a meeting, soon. I await your response. JEFFERSON BYRD __________________________________________________________________ Tiscali Adsl 2 Mega Free: naviga gratis tutto l'anno! Supera tutti i limiti di velocita' con Tiscali Adsl 2 Mega Free. Sei libero da costi fissi e, se ti abboni entro l'8 novembre, navighi gratis tutto l'anno. http://abbonati.tiscali.it/adsl/

1 0

how data moves with dataontap command?
by cem iscen 18 Oct '04

18 Oct '04

Hi there, Is there any way using dataontap command to move data from one qtree to another qtree? Ndmpcopy just copied data to new location , doesn't delete the original data. Regards, Cem Iscen

2 1

URGENT RESPONES
by emeka mike 18 Oct '04

18 Oct '04

Dear , I am the chairman of the contract award committee,of the Federal Ministry of Petroleum Resources,U.S.A. I am in search of an agent to assist us in the final transfer of [$30.75m] and subsequent investment in properties in your country. You will be required to : [1] Assist in the final transfer of the said sum. [2] Advise on lucrative areas for investment. [3] Assist us in purchase of properties. If you are interested to assist us in this regard, you will be given 20% of the total sum. You should please respond if you are interested for more details. Best Regards. Engr. David Emeka. ¡Sé listo! Contrata el antivirus http://www.pandasoftware.es/tienda/?idpers=109&track=13920

1 0

read and get back
by shadak_love 17 Oct '04

17 Oct '04

___________________________________________________________________________ Mail sent from WebMail service at PHP-Nuke Powered Site - http://yoursite.com

1 0

RE: parity drive rebuild causing ls hangs
by Derek Lai 15 Oct '04

15 Oct '04

What is your setting on raid.reconstruct.perf_impact? The default is set to medium. You can try to set it to low and the ls performance might be better. But keep in mind the rebuilds might take longer. How many disk is in your raidgroup? Keep in mind that when the filer is in rebuild mode, the number of I/O skyrockets. If you have 8 disks in the raidgroup and one disk fails, any single I/O request for a piece of information store in that raidgroup is going to cause 7X the amount of I/O compared to normal operation. This is not peculiar to NetApp but a normal thing for raid. One other way to get better performance without having the rebuilds take longer is to reduce the number of disk you have in the raidgroup. Derek -----Original Message----- From: Jerry [mailto:juanino@yahoo.com] Sent: Friday, October 15, 2004 6:55 AM To: list toasters Subject: parity drive rebuild causing ls hangs Anyone ever experience really bad performance when rebuilding a parity disk? We had a parity disk fail on our FAS940 and when it was trying to rebuild the disk i/o util went to 100% (observed with sysstat). Reads and Writes did not appear high, but I don't think rebuild traffic effects those numbers. During this time, "ls" was taking between 30 and 60 seconds (unacceptable). We thought for sure this couldn't be normal, since we've had disks fail and rebuild many times. The difference this time is it was a parity disk, but I don't think that should make a difference other than taking a little longer to rebuild. Sure enough, after the rebuild was complete it started working again. Any opinions? Jerry __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

3 2

RE: parity drive rebuild causing ls hangs
by Derek Lai 15 Oct '04

15 Oct '04

I don't think you want to focus on disk utilization during rebuilds. Even with the low impact setting it is supposed to rebuild as fast as it can, just give higher priority to regular data traffic. Derek -----Original Message----- From: Jerry [mailto:juanino@yahoo.com] Sent: Friday, October 15, 2004 9:37 AM To: Derek Lai Cc: 'toasters(a)mathworks.com' Subject: RE: parity drive rebuild causing ls hangs Writes were bouncing around, but no more than 10 Megabytes/sec. Even went the writes went down to 1MB/sec the util was still burried at 99 or 100%. --- Derek Lai <Derek.Lai(a)onyxco.com> wrote: > I don't think there is much difference between > rebuilding a data disk vs. > parity disk. Unless you are doing lots of writes. > Since the writes will also > have to update the parity disk, they may be > contending with the rebuild. Do > you have any idea how much writes were going on? > > > Derek > > -----Original Message----- > From: Jerry [mailto:juanino@yahoo.com] > Sent: Friday, October 15, 2004 9:02 AM > To: Derek Lai > Cc: 'toasters(a)mathworks.com' > Subject: RE: parity drive rebuild causing ls hangs > > > I think there are only 5 72g disks in that raid > group. > Still, I've done this with data disks many times, > and > the rebuild at "medium" is not really noticeable. > We > set it to low during the rebuild, still no effect. > > We're not talking about something a performance > metric > picked up, we're talking about a 30-60 sec on just > an > ls (small disk i/o presumeably). Something wasn't > right. > > --- Derek Lai <Derek.Lai(a)onyxco.com> wrote: > > > What is your setting on > > raid.reconstruct.perf_impact? The default is set > to > > medium. You can try to set it to low and the ls > > performance might be better. > > But keep in mind the rebuilds might take longer. > > > > How many disk is in your raidgroup? Keep in mind > > that when the filer is in > > rebuild mode, the number of I/O skyrockets. If you > > have 8 disks in the > > raidgroup and one disk fails, any single I/O > request > > for a piece of > > information store in that raidgroup is going to > > cause 7X the amount of I/O > > compared to normal operation. This is not peculiar > > to NetApp but a normal > > thing for raid. > > > > One other way to get better performance without > > having the rebuilds take > > longer is to reduce the number of disk you have in > > the raidgroup. > > > > > > Derek > > > > -----Original Message----- > > From: Jerry [mailto:juanino@yahoo.com] > > Sent: Friday, October 15, 2004 6:55 AM > > To: list toasters > > Subject: parity drive rebuild causing ls hangs > > > > > > Anyone ever experience really bad performance when > > rebuilding a parity disk? We had a parity disk > fail > > on our FAS940 and when it was trying to rebuild > the > > disk i/o util went to 100% (observed with > sysstat). > > Reads and Writes did not appear high, but I don't > > think rebuild traffic effects those numbers. > > > > During this time, "ls" was taking between 30 and > 60 > > seconds (unacceptable). We thought for sure this > > couldn't be normal, since we've had disks fail and > > rebuild many times. The difference this time is > it > > was a parity disk, but I don't think that should > > make > > a difference other than taking a little longer to > > rebuild. Sure enough, after the rebuild was > complete > > it started working again. Any opinions? > > > > Jerry > > > > __________________________________________________ > > Do You Yahoo!? > > Tired of spam? Yahoo! Mail has the best spam > > protection around > > http://mail.yahoo.com > > > > > > > __________________________________ > Do you Yahoo!? > Yahoo! Mail - Helps protect you from nasty viruses. > http://promotions.yahoo.com/new_mail > _______________________________ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com

1 0

RE: parity drive rebuild causing ls hangs
by Derek Lai 15 Oct '04

15 Oct '04

I don't think there is much difference between rebuilding a data disk vs. parity disk. Unless you are doing lots of writes. Since the writes will also have to update the parity disk, they may be contending with the rebuild. Do you have any idea how much writes were going on? Derek -----Original Message----- From: Jerry [mailto:juanino@yahoo.com] Sent: Friday, October 15, 2004 9:02 AM To: Derek Lai Cc: 'toasters(a)mathworks.com' Subject: RE: parity drive rebuild causing ls hangs I think there are only 5 72g disks in that raid group. Still, I've done this with data disks many times, and the rebuild at "medium" is not really noticeable. We set it to low during the rebuild, still no effect. We're not talking about something a performance metric picked up, we're talking about a 30-60 sec on just an ls (small disk i/o presumeably). Something wasn't right. --- Derek Lai <Derek.Lai(a)onyxco.com> wrote: > What is your setting on > raid.reconstruct.perf_impact? The default is set to > medium. You can try to set it to low and the ls > performance might be better. > But keep in mind the rebuilds might take longer. > > How many disk is in your raidgroup? Keep in mind > that when the filer is in > rebuild mode, the number of I/O skyrockets. If you > have 8 disks in the > raidgroup and one disk fails, any single I/O request > for a piece of > information store in that raidgroup is going to > cause 7X the amount of I/O > compared to normal operation. This is not peculiar > to NetApp but a normal > thing for raid. > > One other way to get better performance without > having the rebuilds take > longer is to reduce the number of disk you have in > the raidgroup. > > > Derek > > -----Original Message----- > From: Jerry [mailto:juanino@yahoo.com] > Sent: Friday, October 15, 2004 6:55 AM > To: list toasters > Subject: parity drive rebuild causing ls hangs > > > Anyone ever experience really bad performance when > rebuilding a parity disk? We had a parity disk fail > on our FAS940 and when it was trying to rebuild the > disk i/o util went to 100% (observed with sysstat). > Reads and Writes did not appear high, but I don't > think rebuild traffic effects those numbers. > > During this time, "ls" was taking between 30 and 60 > seconds (unacceptable). We thought for sure this > couldn't be normal, since we've had disks fail and > rebuild many times. The difference this time is it > was a parity disk, but I don't think that should > make > a difference other than taking a little longer to > rebuild. Sure enough, after the rebuild was complete > it started working again. Any opinions? > > Jerry > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam > protection around > http://mail.yahoo.com > __________________________________ Do you Yahoo!? Yahoo! Mail - Helps protect you from nasty viruses. http://promotions.yahoo.com/new_mail

2 1

Undeliverable: Re:
by System Administrator 14 Oct '04

14 Oct '04

Your message To: Malek.hamdan Subject: Re: Sent: Fri, 15 Oct 2004 05:19:03 +1000 did not reach the following recipient(s): Malek.hamdan on Fri, 15 Oct 2004 04:19:14 +1000 The recipient name is not recognized The MTS-ID of the original message is: c=au;a=telememo ;p=davnet pty. ltd.;l=SYD-MAIL-0104101418194AVY9K24 MSEXCH:IMS:Davnet Pty. Ltd.:Sydney:SYD-MAIL-01 0 (000C05A6) Unknown Recipient

1 0

FW: NetApp Question
by Alec Devroey 14 Oct '04

14 Oct '04

Could anyone answer any of the following questions: SQL Questions I have 2 SQL Servers that replicate with each other using SQL Replication. One of the servers (Server1) Is a remote server at a Site and the other (Server 2) is based in a DataCenter and is connected to a FAS. If I would use SnapManager for SQL and restore a snapshot of the SQL Database what would happen to my SQL Synchronisation. Firewall Questions I also have 2 SQL servers in the DMZ, What do I need to do to the our firewall to allow these 2 servers to connect to the FAS, What are my possibilities, Is it a high security risk Snapshots How do I configure snapshots to act like a GFS rotation, Daily, weekly and Monthly Windows Question Is there a limit on how many Tape Devices I can connect to Windows Server without affecting backup performance, someone once told me that is recommended that only 4 drives should be connected. All help greatly appreciated Met Vriendelijke Groeten Alec Devroey Consultant - Systems & Data Integration Simac nv/sa KMO zone Guldendelle Arthur De Coninckstraat 5 B-3070 KORTENBERG Belgium Tel. General +32 (0)2 7551511 Tel Mobile +32 (0)476 610363 E-Mail: alec.devroey(a)simac.be <mailto:n@simac.be> Web-site: http://www.simac.be <http://www.simac.bbe/> ##################################################################################### This e-mail and any attached files are confidential and may be legally privileged. If you are not the addressee, any disclosure, reproduction, copying, distribution, or other dissemination or use of this communication is strictly prohibited. If you have received this transmission in error please notify Simac immediately and then delete this e-mail. Simac has taken all reasonable precautions to avoid virusses in this email. Simac does not accept liability for damage by virusses, for the correct and complete transmission of the information, nor for any delay or interruption of the transmission, nor for damages arising from the use of or reliance on the information. All e-mail messages addressed to, received or sent by Simac or Simac employees are deemed to be professional in nature. Accordingly, the sender or recipient of these messages agrees that they may be read by other Simac employees than the official recipient or sender in order to ensure the continuity of work-related activities and allow supervision thereof. #####################################################################################

2 1

netapp ndmp backup faq anywhere?
by Tavis Gustafson 13 Oct '04

13 Oct '04

Does anyone know of a recent backup over ndmp faq I could look at. I would like to backup 15 or so netapps to tape via ndmp. Is there a viable free method of doing this? Comercial solutions cost upwards of 30K ! thank, -Tavis

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters