toasters

toasters@lists.teaparty.net

2 participants
13529 discussions

OSSV SnapVault
by Alec Devroey 02 Dec '04

02 Dec '04

Has anyone used OSSV SnapVault to backup data from Windows, Unix, Linux and Sco. How does it handle Database files like * Oracle - What needs to happen to the Database file before it is transmitted, and what is transmitted from the Server to the Filer Changes or whole database? * SQL - What needs to happen to the Database file before it is transmitted, and what is transmitted from the Server to the Filer ? * Informix -What needs to happen to the Database file before it is transmitted, and what is transmitted from the Server to the Filer ? * Lotus Notes - What needs to happen to the Database file before it is transmitted, and what is transmitted from the Server to the Filer ? All help greatly appreciated Regards Al ##################################################################################### This e-mail and any attached files are confidential and may be legally privileged. If you are not the addressee, any disclosure, reproduction, copying, distribution, or other dissemination or use of this communication is strictly prohibited. If you have received this transmission in error please notify Simac immediately and then delete this e-mail. Simac has taken all reasonable precautions to avoid virusses in this email. Simac does not accept liability for damage by virusses, for the correct and complete transmission of the information, nor for any delay or interruption of the transmission, nor for damages arising from the use of or reliance on the information. All e-mail messages addressed to, received or sent by Simac or Simac employees are deemed to be professional in nature. Accordingly, the sender or recipient of these messages agrees that they may be read by other Simac employees than the official recipient or sender in order to ensure the continuity of work-related activities and allow supervision thereof. #####################################################################################

2 1

experiences with a FAS270c?
by Kelsey Cummings 02 Dec '04

02 Dec '04

I'm considering purchasing a FAS270c and I'm wondering if anyone has any experiences with them to share. I've worked with NetApps for a long time -- the first was a f230 -- and they've never let me down so I don't expect less from the FAS2xx series. -k

1 0

No more
by Dalton Ragland 02 Dec '04

02 Dec '04

Wed, 01 Dec 2004 15:08:18 -0800 Sometimes its a pain to be painful. You think giving you that type of grief is easy? Your pain works hard! Go here http://idontwanttobugyou.com/indexv.shtml?aa5177 to arrange an extended vacation for your pain.

1 0

RE: Simulation jobs peaking filer CPU & CP
by Frank P 01 Dec '04

01 Dec '04

Sounds like the NFS ops your LSF cluster generate may simply be overloading your 960 ... Have you tried any filers other than the 960? The 980 filer has SPEC sfs numbers more than 40% faster than the 960. If you really need high-performance try a filer even faster than a 980. On Spec.org you'll find the Spec numbers for the Titan filer, which delivers more than twice the spec. ops of a 960 filer and is almost 40% faster than a 980. That would probably help handle any LSF cluster load for a while. http://www.spec.org/sfs97r1/results/sfs97r1.html Published Spec results - single head 960 25135 980 36063 Titan 50858 Published Cluster Spec. results 960c 48143 980c 68139 Titanc 101571 http://www.marketwire.com/mw/release_html_b1?release_id=75166 If you don't get a faster filer, the other option is to break-up the jobs into smaller parts. Let me know what you end up doing ... could be useful and interesting. Cheers Frank Patterson "Everything should be made as simple as possible, but not simpler." Albert Einstein -----Original Message----- From: cisco joe [mailto:ciscojoe305@yahoo.com] Sent: Tuesday, 30 November 2004 2:45 AM To: toasters(a)mathworks.com Subject: Simulation jobs peaking filer CPU & CP All, We have some issues with LSF simulation jobs writing to filers(FAS960) .. Filer's CPU peaking to 100% and NFS goes beyond 80K and CP back to back happening when users executes LSF regress simulations jobs...These jobs has heavy writes to filer and even read also high.. Because of this huge writes filer is going to hung state where simple ls or df from NFS is hanging ..Even telnet or rsh to filer will take long time ... If anybody has any workaround pls let me know Any suggestions is highly helpful Thanks Joe _________________________________________________________________ Dont just search. Find. Check out the new MSN Search! http://search.msn.click-url.com/go/onm00200636ave/direct/01/

1 0

Dear Friend
by bellikatu＠gemari.or.id 01 Dec '04

01 Dec '04

Hello Friend, I wrote this letter as confidential one to you, please kindly read it carefully and send a reply to me. My name is Mrs Bellinda Katumura, former director of finance in the campaign team of Ex. President D Ratsiraka, of Republic of Madagascar, an island in the Indian ocean. I worked with him for years until he was ousted with violent protest by the opposition, and he went into exile in France. This protest erupted during the election period, it was bloody that several people died including my husband. Since the opposition took power in Feb 2001, many of us who served in the regime of the former president have been subjected to several intimidation and detentions, as am writing you now we have not totally regained our freedom. I have one thing that disturbs me. In the last days of the ex-president he took all the monies for the election along with him to exile. The one in my custody was properly hidden by myself, and I told him (the ex president) that it was gutted by fire in my office set by mobs of the opposition. Truely the office was razed down beyond recognition by fire, it is a fact he knows therefore no questions to answer. Immediately he left and the tensed atmophere beclouding our nation there was rush of foreign nationals leaving our country with their families and belongings for safety, under that cover I was able to send out the amount left in my custody to a country in europe through cargo, the consignment was disguised as personal effect. The amount involved is ( $16,000,000=) sixteen million dollars cash. I have contacted the company and they aknowledge receipt of the consignment they have also informed me to come forward for collection. I did not inform them that my freedom in my country is not total. I am not permitted yet to travel out of my country. I need somebody, who understands my situation to travel to the country in europe where the consignment was sent, with the informations I will pass on to him, to stand as my partner/beneficiary and took delivery of the consignment and lodge it into his account for safety. I write this letter to you, to seek your assistance in this issue, we shall discuss other informations as soon as you declare interest to assist me. All required information will be passed to you including the company name and the name of the country where the consignment is. If you have any question pls ask me. Expecting your reply soonest. Also treat as Highly Confidential. Yours Truely. Mrs. Bellinda Katumura. Antananarivo.

1 0

RE: Simulation jobs peaking filer CPU & CP
by Hill, Aaron 30 Nov '04

30 Nov '04

80K is a lot of NFS ops to say the least. I wasn't awareYou may be at the limits of the device, but we won't know for sure until we see a few statistics. Questions; What is disk utilization during this period? I assume your sysstat is indicating at least one disk is at 100% What size raid groups do you have on your volumes? Please capture a statit output? Rsh <filer> "priv set advanced;statit -b" , leave for a period while the utilization is known to be high. Rsh <filer> "priv set advanced;statit -e" > output.log (capturing output to a file). Let have a look at that output and see if you are bound on one or a few disks in a raid group, or whether you are just asking too much of the filer. There are a few other things in the statit that will be useful. You may have to look at splitting the workload across volumes or even into other filers. --Aaron -----Original Message----- From: cisco joe [mailto:ciscojoe305@yahoo.com] Sent: Tuesday, 30 November 2004 2:45 AM To: toasters(a)mathworks.com Subject: Simulation jobs peaking filer CPU & CP All, We have some issues with LSF simulation jobs writing to filers(FAS960) .. Filer's CPU peaking to 100% and NFS goes beyond 80K and CP back to back happening when users executes LSF regress simulations jobs...These jobs has heavy writes to filer and even read also high.. Because of this huge writes filer is going to hung state where simple ls or df from NFS is hanging ..Even telnet or rsh to filer will take long time ... If anybody has any workaround pls let me know Any suggestions is highly helpful Thanks Joe __________________________________ Do you Yahoo!? Take Yahoo! Mail with you! Get it on your mobile phone. http://mobile.yahoo.com/maildemo ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

1 0

Simulation jobs peaking filer CPU & CP
by cisco joe 29 Nov '04

29 Nov '04

All, We have some issues with LSF simulation jobs writing to filers(FAS960) .. Filer's CPU peaking to 100% and NFS goes beyond 80K and CP back to back happening when users executes LSF regress simulations jobs...These jobs has heavy writes to filer and even read also high.. Because of this huge writes filer is going to hung state where simple ls or df from NFS is hanging ..Even telnet or rsh to filer will take long time ... If anybody has any workaround pls let me know Any suggestions is highly helpful Thanks Joe __________________________________ Do you Yahoo!? Take Yahoo! Mail with you! Get it on your mobile phone. http://mobile.yahoo.com/maildemo

1 0

RE: is toaster down ?
by Kevin Davis 29 Nov '04

29 Nov '04

> toaster news are down ? No, Stephane, the list is working. It hasn't seen a lot of activity lately, though. *------------------------------------------*-----------------------* | Kevin Davis (UNIX Sysadmin) | Natick, Massachusetts | | 508.647.7660 | 01760-2098 | | mailto:kevin.davis@mathworks.com *-----------------------* | http://www.mathworks.com <http://www.mathworks.com/> | | *------------------------------------------*-----------------------* ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Stephane Bentebba Sent: Wednesday, November 24, 2004 8:43 AM To: toasters Subject: is toaster down ? toaster news are down ? i no more receive mail from this list -- Stéphane Bentebba Technicien de Maintenance Tél.: +33 (0)1.41.73.20.16 Fax.: +33 (0)1.41.73.20.08 support(a)fps.fr www.fps.fr <http://www.fps.fr> <http://www.fps.fr> FPS France Parc d'affaire Silic 43, rue de la Grosse Pierre BP 40160 94533 RUNGIS Cedex

1 0

Re: Email Marketing Campaigns --- 1 year for $500
by Invenio Sales 29 Nov '04

29 Nov '04

Do you believe in the saying, "Persistence pays"? We do, and so we're writing you this letter. We're a marketing firm who excels in setting qualified sales appointments and sales support for small and midsize companies. We succeed where others fail because of our persistence. Email Marketing Campaigns --- Starting at $500 - 12 months of broadcasting - Email Ads (We provide effective text only sales letters) - We provide your targeted list (Call us to ask how targeted they are!) - We firewall your company's name by only sharing your identity with prospects who ARE interested in your services - We'll maintain Can-Spam compliancy (we'll remove all removal requests from list before each new broadcast) - We forward all leads to you via email Lets not waste any time in getting you digitally bonded with your prospects. Your future profits and our own depend upon it. Regards, Matt LaClear Marketing Director 517-214-8061 inveniosales(a)550access.com (Select Target)*(Adjust Stance)*(Swing Full, Controlled and HARD)*(Follow Through) = Success ___________________________________________________________________________ _______________________________________________ This is an advertisement from Invenio Sales. To be removed fom our list simply hit reply and type "remove" in the subject line. To be removed via US Mail write the advertiser at 2107 Ferrol St, Lansing, MI 48910

1 0

RE: Group Policy Software Installations
by Allendörfer, Carsten 28 Nov '04

28 Nov '04

We are using exactly the same setup in our environment. We have GPO's applied to machines where the MSI-files are located on a filer. What you need to be aware of: - the filer needs to have Kerberos enabled - if it is a ntfs qtree the machine accounts need to have read access - probably "Domain Computers":Read - the NetApp needs to have a valid user mapping from the Windows machine account to a valid Unix id. We have the default Unix user set to: wafl.default_unix_user nobody and have a entry for nobody in /etc/passwd nobody:*:65534:65534:Guest for NT:/root:/bin/sh I don't believe that we have configured anything else to get the software installation working - but I could be wrong - that was some years ago... If it doesn't work set the options cifs.trace_login to on and watch the console for mapping errors. Carsten ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Steve Evans Sent: Wednesday, November 24, 2004 12:48 PM To: toasters(a)mathworks.com Subject: RE: Group Policy Software Installations Sorry, I'm applying the GPO to workstations to install certain software. The software package (the msi) is being housed on the Filer. When you assign the software to a machine it tries to connect with the machine credentials and fails. Steve Evans SDSU Foundation ________________________________ From: SKIP HOFMANN [mailto:SKIP.HOFMANN@ttisg.com] Sent: Wednesday, November 24, 2004 11:06 AM To: Steve Evans; toasters(a)mathworks.com Subject: RE: Group Policy Software Installations What kind of GPO would you want to assign to a filer? Is the filer part of the domain? ________________________________ From: Steve Evans [mailto:sevans@foundation.sdsu.edu] Sent: Wednesday, November 24, 2004 10:21 AM To: toasters(a)mathworks.com Subject: Group Policy Software Installations Where trying to deploy a piece of software via Group Policy. If we assign it to the user it works fine, but if we assign it to the machine it can't find the source on the Filer. If we move the installation package to a Win2k3 machine we can assign it to the machine. Anyone know how to fix this with Filers? Steve Evans SDSU Foundation

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters