toasters

toasters@lists.teaparty.net

3 participants
13534 discussions

Sybase not SQL
by Robert Black 22 Jan '99

22 Jan '99

Opps! Sorry all my brain was thinking SQL my eyes were seen Sybase. Been that kind of week. Bob ----------------------------------------------------------------- Robert Black Email: bobbl(a)netapp.com Network Appliance, Inc. Voice: (800) 550-6827 Systems Engineer - Pacific NW Pager: (800) 465-7149 -----------------------------------------------------------------

1 0

RE: Microsoft exchange
by Allison, Bridget 22 Jan '99

22 Jan '99

> Actually, I think exchange requires that all data be stored on local > drives, just like SQL server does. That's true today but NetApp is working with Microsoft to change that. Check out http://now.netapp.com/solutions/index.shtml (requires NOW login and password) for more info. If you need more info after that then contact me directly at bridget(a)netapp.com Bridget ============================= Bridget Allison Network Appliance Inc. office: (408) 367 3419 cell: (408) 823 1126

1 0

unsubscribe
by Daniel Long 22 Jan '99

22 Jan '99

unsubscribe

1 0

backup with a STK 9730 Library
by Jason Middlebrooks 22 Jan '99

22 Jan '99

Does anybody have any ideas of how to use a STK 9730 library with a F740. I can not go the Netbackup route at this time. What about BudTools or anything? Jason Middlebrooks Systems Engineer Datalink Phone: 770-933-9327x260 2264 Northwest Parkway, Suite I Pager: 888-502-1625 Marietta, GA 30067 Fax: 770-933-9272

1 0

Backup Solution for a F760
by Des Barden 22 Jan '99

22 Jan '99

Could someone please advise what is a good solution for backing up a F760. We are looking to have a day one usage of 600 megabytes useable, scalable upto 2 terabyte system. We would prefer to use Veritas Netbackup as the Backup Manager software. The backup window is to backup within 24 hours for a full backup. Des Barden Team Leader Unix/LAN IS Regional Services (Harlow) Nortel Networks Esn: 742-5856

2 1

Subscribe
by Jonas Jonsson 22 Jan '99

22 Jan '99

1 0

SUMMARY: can't control access over CIFS
by Tom Reingold 22 Jan '99

22 Jan '99

Thanks to Keith Brown of Netapp! His answer was right. After connecting a drive (or being told the user is not allowed), changing the permissions is not adequate. The user has to log out of NT. Keith suggested also doing "cifs terminate workstation-name" on the toaster, which I'll try next time. Thanks to Mark Muhlestein of Netapp for following up to make sure I'm a satisfied customer. I think we get more than our money's worth on this mailing list. :-) What other vendor follows up so thoroughly? Thanks to all others who tried. -- Tom Reingold tommy(a)bell-labs.com http://www.bell-labs.com/~tommy Bell Labs, the Research and Development unit of Lucent Technologies Murray Hill, NJ, 07974-0636 US

1 0

Subnet/Gateway Problem
by Patrick.Day.B＠bayer.com 22 Jan '99

22 Jan '99

I have a 740 with a 4-Port nic card. We are running both WINS and DNS (and the respective addresses are static-mapped). I have attached each port to a different subnet (they are all connecte via routers). When i run setup, it asks for each nic address and subnet mask, howerver it only asks for one gateway address for all. Only the nic that corresponds to the gateway will respond. How can i configure a default gateway for each port? -Patrick Day Bayer Corporation

2 1

Re: Subnet/Gateway Problem
by Keith Brown 22 Jan '99

22 Jan '99

> http://now-internal.netapp.com/knowledge/contents/TIP/TIP_55.shtml > >and: > > http://now-internal.netapp.com/knowledge/contents/TIP/TIP_56.shtml Doh! My apologies to everyone. I cut and pasted the above links from my browser and promptly forgot to modify them for *external* access to NOW. Unless you work here, you won't be able to get to these. The correct links are: http://now.netapp.com/knowledge/contents/TIP/TIP_55.shtml http://now.netapp.com/knowledge/contents/TIP/TIP_56.shtml Keith

2 1

Re: Subnet/Gateway Problem
by Keith Brown 21 Jan '99

21 Jan '99

>How can i configure a default gateway for each port? There are some "Tip and Technique" documents in the Knowledge Base of the NOW website that discusses this (at least they discuss the issue of multiple default gateways). They are: http://now-internal.netapp.com/knowledge/contents/TIP/TIP_55.shtml and: http://now-internal.netapp.com/knowledge/contents/TIP/TIP_56.shtml Hopefully they will answer your question. Take a look at the doc for /etc/dgateways also, which you will probably find at: http://yourfiler.bayer.com/na_admin/man/na_dgateways.5.html Keith

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters