toasters July 2008

toasters@lists.teaparty.net

50 participants
32 discussions

Netapp and VMware... It's all so confusing!
by Timothy Hollingworth 01 Apr '10

01 Apr '10

So, say for example, I want to virtualize an Exchange server. Lets also say that I want to manage it via Snapdrive and SME. Lets also say, just for the heck of it, that I want both the new front-engined Acura NSX as well as the Porsche RC3. The cars aside, I would have to run iSCSI from within the VM, install and use Snapdrive from within the VM to provision LUNs, install Exchange and then use SME? It seems kind of silly to use iSCSI from within a VM if the ESX box were fiber attached to the … [View More]

11 15

how to "move" an existing snapmirror to new network interfaces?
by Todd C. Merrill 18 Aug '08

18 Aug '08

I have lots of existing q-tree snapmirrrors of the form: srcfiler:/vol/volM/qtreeX destfiler:/vol/volN/qtreeY "srcfiler" (DNS name) is the e11 interface on srcfiler "destfiler" (DNS name) is the e9a interface on destfiler We just built a "dedicated snapmirror/backup" network and added the following: "srcfiler-backup" (DNS name) is the e0 inteface on srcfiler "destfiler-backup" (DNS name) is the e11a interface on destfiler Subsequent 'snapmirror update -S ...' commands (we don't use … [View More]

5 7

Solaris 9 Iscsi HBA failover question
by Alon Zeltser 30 Jul '08

30 Jul '08

Hello Toasters I'm going to implement Iscsi network on solaris 9 machine and FAS2020 cluster As you know iscsi software initiator is available only on solaris 10 and it's possible to achieve failover in with IPMP and software initiator since i will be using solaris 9 machine i need hardware initiator in my case i will be using 2 qla4010c is it possible to achieve redundancy at the host side ( HBA failover \ multipathing) in this configuration if so how ? Thanks -- Alon Zeltser … [View More]

2 1

Migrating data without service interruption : 3020 -> 3140
by Simon Vallet 28 Jul '08

28 Jul '08

Hi, we just received a new 3140 cluster here to upgrade an existing 3020c production filer. And now we're looking for a way to migrate the existing data (~18TB) with the least possible downtime. Ideally, we would use SnapMirror to copy the data on the new filer and then transparently (for clients) switch the production system, similarly to what happens when a cluster member fails over to the other member. But we don't know if this is possible. So the questions are: - do you think such a … [View More]

5 5

Logging SSH sessions
by Zeeshan 26 Jul '08

26 Jul '08

Hi all... Is there any way to log all SSH sessions on the filer in /etc/messages...or somehow view current SSH sessions...especially the IP addresses of hosts... With default settings, the message daemon only logs failed logon attempts... Thanx

4 3

FC Tape drives on R200
by Robert K. Borowicz 25 Jul '08

25 Jul '08

Has anybody configured a IBM 3592 E5 Tape drive off of an R200 via Fiber Channel ? I'm hoping to configure it via the newly zoned port on my X1028A. TIA -Robert

1 0

Re: Logging SSH sessions
by Steve Rieger 25 Jul '08

25 Jul '08

Check /var/log/secure ------Original Message------ From: Zeeshan Sender: owner-toasters(a)mathworks.com To: Toasters List Sent: Jul 24, 2008 20:45 Subject: Logging SSH sessions Hi all... Is there any way to log all SSH sessions on the filer in /etc/messages...or somehow view current SSH sessions...especially the IP addresses of hosts... With default settings, the message daemon only logs failed logon attempts... Thanx Sent via BlackBerry from T-Mobile

1 0

Re: Logging SSH sessions
by Steve Rieger 25 Jul '08

25 Jul '08

1 0

Re: [RE]Weird autosupport problem
by David McWilliams 23 Jul '08

23 Jul '08

No problem. We tried http, https & smtp, but no real difference. Sláinte, David Give a man a fire and he's warm for the day. But set fire to him and he's warm for the rest of his life. - Terry Pratchett, Discworld On Wed, Jul 23, 2008 at 12:32 PM, oakley <oakerz(a)lycos.com> wrote: > No disrepect intended, but are you sure you changed it to SMTP? Looking at > the output you have below, autosupport.support.transport is set to HTTP and > not SMTP. > > - Mike > … [View More]> > > ---------[ Received Mail Content ]---------- > > Subject : Weird autosupport problem > > Date : Wed, 23 Jul 2008 11:40:43 -0400 > > From : "David McWilliams" <davidkmcw(a)gmail.com> > > To : "NetApp list" <toasters(a)mathworks.com> > > > > Autosupport worked fine up until about six weeks ago, no it doesn't. We > > can't think of anything that changed in the environment. > > > > We can ping the mailserver, I tried telnetting to the mailserver on port 25 > > to see if it is still relaying, seems to be OK. We weren't seeing any > > messages at all regarding autosupport in the messages file, an time we > > tested. We just changed the transport to smtp, from https, and we now get > > one message, but that's all, see below. > > > > netapp2050a> df -h > > > > Filesystem total used avail capacity Mounted on > > > > /vol/rootvol/ 20GB 197MB 19GB 1% /vol/rootvol/ > > > > /vol/rootvol/.snapshot 0TB 0TB 0TB ---% > > /vol/rootvol/.snapshot > > > > > > netapp2050a> options autosupport > > > > autosupport.cifs.verbose off > > > > autosupport.content complete > > > > autosupport.doit DONT > > > > autosupport.enable on > > > > autosupport.from netappalert(a)###.com > > > > autosupport.local.nht_data.enable off > > > > autosupport.local.performance_data.enable off > > > > autosupport.mailhost 10.1.1.130 > > > > autosupport.minimal.subject.id hostname > > > > autosupport.nht_data.enable on > > > > autosupport.noteto > > helpdeskteam(a)###.com > > > > autosupport.performance_data.enable on > > > > autosupport.retry.count 15 (value might be overwritten in > > takeover) > > > > autosupport.retry.interval 4m (value might be overwritten in > > takeover) > > > > autosupport.support.enable on > > > > autosupport.support.proxy > > > > autosupport.support.to autosupport(a)netapp.com > > > > autosupport.support.transport http > > > > autosupport.support.url support.netapp.com/asupprod/post/1.0/postAsup > > > > autosupport.throttle on > > > > autosupport.to > > admin(a)###.com > > > > > > From the messages file > > > > Wed Jul 23 11:04:38 EDT [netapp2050a: asup.general.drop:error]: Out of > > messages for autosupport, skipping autosupport: USER_TRIGGERED (test) > > > > The machine is running 7.2.2L1. Does anyone have any ideas? > > > > Sláinte, > > > > David > > > > Give a man a fire and he's warm for the day. But set fire to him and he's > > warm for the rest of his life. > > - Terry Pratchett, Discworld > > [View Less]

1 0

Weird autosupport problem
by David McWilliams 23 Jul '08

23 Jul '08

Autosupport worked fine up until about six weeks ago, no it doesn't. We can't think of anything that changed in the environment. We can ping the mailserver, I tried telnetting to the mailserver on port 25 to see if it is still relaying, seems to be OK. We weren't seeing any messages at all regarding autosupport in the messages file, an time we tested. We just changed the transport to smtp, from https, and we now get one message, but that's all, see below. netapp2050a> df -h Filesystem … [View More]

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters July 2008