toasters April 2004

toasters@lists.teaparty.net

55 participants
57 discussions

RE: Mrtg for filers on a FAS940 with 6.4.3
by Clawson, Simon 27 Apr '04

27 Apr '04

Upgraded the filer OS to 6.4.4 (hope that does'nt bite me later..) And seem to be getting numbers now. -----Original Message----- From: Jerry [mailto:juanino@yahoo.com] Sent: 26 April 2004 15:40 To: Clawson, Simon; toasters(a)mathworks.com Subject: RE: Mrtg for filers on a FAS940 with 6.4.3 This package is in need of some updating. I don't believe it has a current maintainer. Start by commenting out this in retrieve-cpu.pl: #if ( $ln =~ /Release.*4\.[321]/ ) { #$SF = ""; #} It's lines 40, 41, and 42 for me, but I'm not sure if I modified anything else in there. If that solves your problem, then I'll give you a few more suggestions as I believe the base configuration also fails to use 64bit counters and some magic has to be done to meld together two 32bit counters to prevent the 32bit counter from overflowing. (this will happen if your filer is running for sometime and the counter gets full). Jerry --- "Clawson, Simon" <simon_clawson(a)mentorg.com> wrote: > The packaged version from the NOW site. > > Cheers > > Simon > > -----Original Message----- > From: Jerry [mailto:juanino@yahoo.com] > Sent: 26 April 2004 15:09 > To: Clawson, Simon; toasters(a)mathworks.com > Subject: Re: Mrtg for filers on a FAS940 with 6.4.3 > > Are you using the old mrtg-filer package from netapp, or your own > config? > > --- "Clawson, Simon" <simon_clawson(a)mentorg.com> > wrote: > > Hi, > > > > We have three filers - an F87, an F760 and a new > FAS940. Up until the > > arrival of the FAS940 I have found MRTG for filers > easy to use and > > set-up when adding new equipment. However, with > the 940 it seems that > > the SNMP messages MRTG sends do not work. Has > anyone been able to > > configure the tool for use with this ontap version > and filer model? > > > > Best regards > > > > Simon > > > > Simon Clawson > > Systems Administrator > > HDL Designer Series Team > > > > Mentor Graphics Ireland (UK Branch) > > Rivergate > > Newbury Business Park > > London Road > > Newbury > > Berks > > RG14 2QB > > > > Tel - 01635 811409 > > Fax - 01635 810102 > > > > > > > > > > __________________________________ > Do you Yahoo!? > Yahoo! Photos: High-quality 4x6 digital prints for 25¢ > http://photos.yahoo.com/ph/print_splash __________________________________ Do you Yahoo!? Yahoo! Photos: High-quality 4x6 digital prints for 25¢ http://photos.yahoo.com/ph/print_splash

1 0

RE: Mrtg for filers on a FAS940 with 6.4.3
by Clawson, Simon 26 Apr '04

26 Apr '04

The packaged version from the NOW site. Cheers Simon -----Original Message----- From: Jerry [mailto:juanino@yahoo.com] Sent: 26 April 2004 15:09 To: Clawson, Simon; toasters(a)mathworks.com Subject: Re: Mrtg for filers on a FAS940 with 6.4.3 Are you using the old mrtg-filer package from netapp, or your own config? --- "Clawson, Simon" <simon_clawson(a)mentorg.com> wrote: > Hi, > > We have three filers - an F87, an F760 and a new FAS940. Up until the > arrival of the FAS940 I have found MRTG for filers easy to use and > set-up when adding new equipment. However, with the 940 it seems that > the SNMP messages MRTG sends do not work. Has anyone been able to > configure the tool for use with this ontap version and filer model? > > Best regards > > Simon > > Simon Clawson > Systems Administrator > HDL Designer Series Team > > Mentor Graphics Ireland (UK Branch) > Rivergate > Newbury Business Park > London Road > Newbury > Berks > RG14 2QB > > Tel - 01635 811409 > Fax - 01635 810102 > > __________________________________ Do you Yahoo!? Yahoo! Photos: High-quality 4x6 digital prints for 25¢ http://photos.yahoo.com/ph/print_splash

2 1

RE: Mrtg for filers on a FAS940 with 6.4.3
by Garavito, Donald, CTR, OSD-ATL 26 Apr '04

26 Apr '04

Please check out following bug report: The enterprise OID is not properly encoded for many SNMP traps Several SNMP traps are sent with an improperly encoded enterprise OID, which may result in errors being reported by SNMP trap daemons when those traps are received. In all such instances, the improperly encoded enterprise OID is the network appliance OID. http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail <http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=115524> &Display=115524 -----Original Message----- From: Clawson, Simon [mailto:simon_clawson@mentorg.com] Sent: Monday, April 26, 2004 9:35 AM To: toasters(a)mathworks.com Subject: Mrtg for filers on a FAS940 with 6.4.3 Hi, We have three filers - an F87, an F760 and a new FAS940. Up until the arrival of the FAS940 I have found MRTG for filers easy to use and set-up when adding new equipment. However, with the 940 it seems that the SNMP messages MRTG sends do not work. Has anyone been able to configure the tool for use with this ontap version and filer model? Best regards Simon Simon Clawson Systems Administrator HDL Designer Series Team Mentor Graphics Ireland (UK Branch) Rivergate Newbury Business Park London Road Newbury Berks RG14 2QB Tel - 01635 811409 Fax - 01635 810102

1 0

Mrtg for filers on a FAS940 with 6.4.3
by Clawson, Simon 26 Apr '04

26 Apr '04

Hi, We have three filers - an F87, an F760 and a new FAS940. Up until the arrival of the FAS940 I have found MRTG for filers easy to use and set-up when adding new equipment. However, with the 940 it seems that the SNMP messages MRTG sends do not work. Has anyone been able to configure the tool for use with this ontap version and filer model? Best regards Simon Simon Clawson Systems Administrator HDL Designer Series Team Mentor Graphics Ireland (UK Branch) Rivergate Newbury Business Park London Road Newbury Berks RG14 2QB Tel - 01635 811409 Fax - 01635 810102

2 1

GRANDE PRIZE WINNER!!
by martins maryam 24 Apr '04

24 Apr '04

Sincerely, The Lottery Coordinator, Golden Lottery Uk, 1 Bridge Street Staines Middlesex Tw18 4tp United Kingdom Tel/Fax: 44 7092808613 N.B. Any Breach Of Confidentiality On The Part Of The Winners Will Result To Disqualification. Please Contact Your Claims Agent.

1 0

(Compliment of the weekend)
by Mr Kelvin Harry 24 Apr '04

24 Apr '04

Dear Friend, I decided to contact you and reach agreement with you to transfer the sum of $5.35Million to a foreigner's account,who would apply to my bank in London as a Next of Kin/Beneficiary/Survivor to Late Mr Ken Horne as I have resolved after a long fruitless effort to contact his relatives. I shed tears seeing how the fruit of his hard Labour is being Lost in the hands of our financial Manager,who loans out money from his account and making profits and my bank's negligence to protect this account. I want you as a matter of ultmost urgency to co-operate with me,so that I shall send you the account documents from his account file and you shall contact my bank to effect a Next of Kin claim and get his account paid to you as his sole beneficiary/Next of Kin.I will immediately send you a Next of Kin application form as soon as I secure our co-operation.I will provide you with every other informations and documecnts needed for this transaction,as I get your urgent response. Late Mr Ken Horne was a Las Vegas chess organizer,he died in an Airplane Crash August 20, 1999. For more about his death visit this website: http://www.ishipress.com/horne.htm I shall be expecting your Urgent Co-operation immediately,and would assume you are not interested if you don't respond urgently.Send your Phone Number for our easy communication which is very paramount and your Fax Number. Bye for now,until I hear from you. Best regards {Account Officer} Tel: +447092808908 Reply: mrkelvinharry_ubuk(a)yahoo.co.uk =========================================================================================== Netkuis Instan untuk wilayah Bandung (kode area 022) - SD,SMP,SMA berhadiah total puluhan juta rupiah... periode I dimulai 1 April 2004 ===========================================================================================

1 0

your help needed
by fredrick anderson 24 Apr '04

24 Apr '04

Mr.Fredrick Anderson Dubai(UAE) fanderson(a)asia.com Attention, Dear friend, greetings to you in the name of our heavenly God. This mail might come to you as a surprise and the temptation to ignore it as unserious could come into your mind; but please, consider it a divine wish and accept it with a deep sense of humility. My name is fred anderson . I?m a 65 years old man. I am British living in Dubai (United Arab Emirate). I was a merchant and owned two businesses in Dubai. I was also married with two children. My wife and two children died in a car accident six years ago. Before this happened my business and concern for making money was all I lived for. I never really cared about other values in life. But since the loss of my family, I have found a new desire to assist helpless families. I have been helping orphans in orphanage/ motherless homes. I have donated some money to orphans in Sudan, South Africa, Cameroon, Brazil, Spain, Austria, Germany and some Asian countries. Before I became ill, I kept $15 Million in a long-term deposit account in a finance/security company . Presently, I?m in a hospital where I have been undergoing treatment for oesophageal cancer. I have since lost my ability to talk and my doctors have told me that I have only a few months to live. It is my last wish to see this money distributed to charity organizations. Because relatives and friends have plundered so much of my wealth since my illness, I cannot live with the agony of entrusting this huge responsibility to any of them. Please, I beg you in the name of God to help me collect the deposit and the interest accrued from the company and distributes it amongst charity organizations. Use your judgement to distribute the money and feel free to reimburse yourself when you have the money for any cost you incur during the process of collecting and distributing the money to charity organizations. . I?m willing to offer you a reward If you are willing to help; please reply as soon as you can. May the good Lord bless you and your family. Regards, fred.Anderson fanderson(a)asia.com

1 0

socket error
by Bui, Marcus 23 Apr '04

23 Apr '04

I just noticed this error started just a day ago on both F880c. Searched NOW but didn't get any info. Everything seems to be fine but just want to make sure. Anyone know what the error mean? Auth06:warning]: Cannot connect to server. Socket connect error: Resource temporarily unavailable Environment: F880c, DOT 6.4.2P12, CIFS only, W2K AD in native mode, only home dir and share data (office files), Windows clients and a few Mac OS X clients. cifs sessions -summary Using domain authentication. Domain type is Windows 2000. Filer is using en_US for DOS users Number of WINS servers: 3 CIFS sessions: 1280 CIFS open shares: 1486 CIFS open files: 689 Thanks, Marcus Bui AIM Investments IT Services phone: 713-986-9061 fax: 713-821-9524 email: marcus.bui(a)aiminvestments.com pager: 8773450839(a)archwireless.net ----------------------------------------- Confidentiality Note: The information contained in this message, and any attachments, may contain confidential and/or privileged material. It is intended solely for the person or entity to which it is addressed. Any review, retransmission, dissemination, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.

1 0

RE: Jumbo frame
by Debbie.Lane＠intermec.com 23 Apr '04

23 Apr '04

Are you using a VIF? My understanding is that the 6509 does not support aggregation and jumbo frames. The 6509 supports aggregation OR jumbo, but not both together. -----Original Message----- From: Derek Lai [mailto:Derek.Lai@onyxco.com] Sent: Thursday, April 22, 2004 4:15 PM To: toasters(a)mathworks.com Subject: Jumbo frame Hi I just took over the administration of a F940C cluster. They and the servers are on a dedicated network running Gigabit Ethernet through a Cisco 6509 switch. I noticed that jumbo frame was not turned on. I had asked the previous administrator why and he said that they had tested the systems initially with Jumbo frame and did not notice any appreciable difference in performance. The main applications we are running are 3 databases - Oracle on HP-UX, Oracle on NT and SQLServer 2000 on NT. Anyone has good performance numbers using Jumbo frame vs. not using Jumbo frame? Jumbo frame is one of the highly recommended things by NetApp and I'd like to implement it but it sure would be nice to have some idea so I can set the right expectations. Thanks. Derek

1 0

Jumbo frame
by Derek Lai 22 Apr '04

22 Apr '04

Hi I just took over the administration of a F940C cluster. They and the servers are on a dedicated network running Gigabit Ethernet through a Cisco 6509 switch. I noticed that jumbo frame was not turned on. I had asked the previous administrator why and he said that they had tested the systems initially with Jumbo frame and did not notice any appreciable difference in performance. The main applications we are running are 3 databases - Oracle on HP-UX, Oracle on NT and SQLServer 2000 on NT. Anyone has good performance numbers using Jumbo frame vs. not using Jumbo frame? Jumbo frame is one of the highly recommended things by NetApp and I'd like to implement it but it sure would be nice to have some idea so I can set the right expectations. Thanks. Derek

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters April 2004