AW: Determining what's contributing to fast aggregate growth

Hi Fletcher,

can you run `aggr show_space -h`, then wait 10 minutes and run it again? You should at least immediately see which volume is causing the growth if the growth is still happening.

Best,

Alexander Griesser System-Administrator

ANEXIA Internetdienstleistungs GmbH

Telefon: +43-5-0556-320 Telefax: +43-5-0556-500

E-Mail: ag@anexia.atmailto:ag@anexia.at Web: http://www.anexia.athttp://www.anexia.at/

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

Von: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] Im Auftrag von Fletcher Cocquyt Gesendet: Mittwoch, 02. April 2014 18:24 An: toasters@teaparty.net Lists Betreff: Determining what's contributing to fast aggregate growth

Hi all,

In the last 36 hours or so we have a 19Tb aggregate that is growing above 18Tb used. Usually the aggregate used level only grows if we grow its volumes. This is different - I was forced to delete snapshots and shrink volumes to get it back under 90%. And in the last 3 hours its back above 91% - used level is climbing 5-10g/minute

I so far can not see where the growth is coming from, Aggr snapshot is OFF

Ontap 8.1.2

na02> aggr status Aggr State Status Options aggr0 online raid_dp, aggr root, nosnap=on, raidsize=19 64-bit

thanks for any tips!