Take a look at the section for the iscsi interface command on the iscsi man page ( https://library.netapp.com/ecmdocs/ECMP1196979/html/man1/na_iscsi.1.html). I've never done it, but it looks like these commands should do what you need.
On Mon, Feb 9, 2015 at 4:20 PM, Philbert Rupkins philbertrupkins@gmail.com wrote:
Hello Toasters,
We have a client looking to limit iscsi services to a dedicated interface. It looks like, by default, ONTAP is running iSCSI portals on all interfaces in both the pfiler (vfiler0) and all vfilers.
Is "iscsi interface disable" on vfiler0 (physical filer) the best way to get rid of all of the extraneous iscsi portals? Will running "iscsi interface disable" on the physical filer get rid of the iscsi portal(s) on the physical filers and vfilers?
Not sure if I'll need to run a portal/tpgroup specific command or if "iscsi interface disable" will get rid of the portals.
8.1.3 7-Mode.
Thanks, Phil
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters