one by one disk replace. if vol0 were a trad volume with 2 disks you would disk replace the first one to a spare disk on the other aggregate. once complete do the same with the other disk. do this *one by one* for all disks that make up your vol0 volume.
-- Daniel Leeds Manager, Storage Operations Edmunds, Inc. 1620 26th Street, Suite 400 South Santa Monica, CA 90404
310-309-4999 desk 310-430-0536 cell
-----Original Message----- From: owner-toasters@mathworks.com on behalf of Ray Van Dolson Sent: Fri 11/14/2008 1:55 PM To: toasters@mathworks.com Subject: Re: Removing a shelf.
On Fri, Nov 14, 2008 at 09:43:49AM -0800, Ray Van Dolson wrote:
On Thu, Nov 13, 2008 at 12:31:36PM -0800, Ray Van Dolson wrote:
Hi all;
We have a loaner NetApp that has three shelves on it. One of those shelves needs to be returned to the vendor.
An aggregate spans two shelves, one of which is the shelf that needs to be returned. This aggregate contains a FlexVol currently in use. I'd like to preserve the FlexVol but remove the shelf.
What are my options? Doesn't look like I can shrink an aggregate. Is my best bet to shut down everything usin the FlexVol, then vol copy it to another aggregate, destroy the original aggregate, remove the shelf and then recreate the aggregate again?
Thanks in advance! Ray
Thanks all for the response.
It's only a 512GB (SIS enabled) volume, so I created a new volume on the other aggregate and am using vol copy to copy the data over. This seems incredibly slow (it's estimating two hours to complete) -- I thought it might be a little quicker since there is only about 130GB of data on the volume.
Gotta figure out how to up the concurrent login limit on the filer as well, can't even fire up another console to stop the copy if I wanted to! :)
Thanks, Ray
So go the volume all moved. Went well. However, I just realized that vol0 is on aggr0! Argh. Is there any way to relocate vol0 safely while the filer is running?
I guess I could snapshot it, vol copy it to aggr1... what would be the side-effects though?
Ray