Heh, does the application also have a preference over disk manufacturer?
I seriously *highly* doubt an application has that much insight into the RAID config of the disk volume it accesses. All of that is masked by the storage controller that presents the storage to the host.
I could easily be very wrong, so I'd be very interested if there is merit to their claim.
Best regards, Kevin M. Parker
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Page, Jeremy Sent: Wednesday, November 28, 2007 4:03 PM To: NetApp list Subject: QAD on NetApp
We are running an application called QAD that runs one of our manufacturing plants. According to our pSeries administrator it can only run on RAID1, does anyone have information about this? I am dubious but want to be certain.
It's on a pSeries that would be FC connected to the filer.
This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.
Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately.