Hello,
I am starting to thin provision LUNs (lun set reservation disable) in order to start using A-SIS on some large (1TB) volumes. Before I turn A-SIS on, I started testing these LUNs and do see the space on the filer grow accordingly with writes on the host. However, the space never seems to go down when I delete files on the host:
rtpstore2b> df /vol/iscsi Filesystem kbytes used avail capacity Mounted on /vol/iscsi/ 10485760 9974748 511012 95% /vol/iscsi/ /vol/iscsi/.snapshot 0 0 0 ---% /vol/iscsi/.snapshot
[root@vrhel5 /]# df /mnt/iscsi Filesystem 1K-blocks Used Available Use% Mounted on /dev/sde1 10321192 7804844 1992064 80% /mnt/iscsi
I see that when I begin writing again, the filer space won't start increasing until there is an increase in space above what the filter already thinks. Is this behavior normal? When I turn SIS on, will the filer LUN size reduce as blocks are deduplicated so that I can then reduce the volume?
Lastly, I will definitely need to know when my volumes autosize so I can focus my attention on not having the aggregate fill up. It would be wonderful if I could set up an SNMP trap to send to Nagios for notification. Before I dig into the MIBs and create the custom trap (if I even can), has anyone done anything similar they could share?
TIA,
Daniel
______________________________________________________________________ This email transmission and any documents, files or previous email messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient or a person responsible for delivering this transmission to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender by telephone or return email and delete the original transmission and its attachments without reading or saving in any manner.