Check the SCSI connections to: 1. make sure ther are no little bent pins 2. screwed down TIGHT
If problems persist, try a different cable. Problems still, RMA the SCSI card. Lastly, RMA the Tape drive itself.
--tmac
On 9/19/07, Ernesto Silvera esilvera@csrven.com wrote:
Hi all,
We are getting errors while trying to replace with a new HP LTO3 drive, the actual LTO1 drive connected to the scsi adapter X2027A of a FAS920 NetApp Release 7.0.4 (see errors and actual configuration below).
NetApp Log # 2475693
I would really appreciate any hints….
Actual Configuration
Model Name: FAS920 NetApp Release 7.0.4
LTO1 drive connected to scsi Adapter
slot 10: SCSI Host Adapter 10a (Adaptec AIC7902, <ONLINE>)
HW Version 0.0 Ultra320 SCSI, Low Voltage Differential I/O base 0xdd00, size 0x100 memory mapped I/O base 0xa04c0000, size 0x2000 I/O base 0xdf00, size 0x100 slot 10: SCSI Host Adapter 10b (Adaptec AIC7902, <ONLINE>) HW Version 0.0 Ultra320 SCSI, Low Voltage Differential 4: Tape: Seagate ULTRIUM06242 1613 I/O base 0xde00, size 0x100 memory mapped I/O base 0xa04c2000, size 0x2000 I/O base 0xdc00, size 0x100SCSI ERRORS
Sat Sep 8 11:04:38 VET [adpch_timeoutd:warning]: adpch_timeoutd: 10a.3(0x0568ede0, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete(ticks = 8). Sat Sep 8 11:04:46 VET [adpch_asyncd:warning]: adpch asyncd: Resetting SCSI 10a target 3 to clear outstanding I/O. Sat Sep 8 11:04:46 VET [adpch_intrd:warning]: adpch_timeoutd: 10a: unquiescing bus Sat Sep 8 11:04:57 VET [adpch_timeoutd:warning]: adpch_timeoutd: 10a.3(0x0568ede0, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete(ticks = 8). Sat Sep 8 11:05:05 VET [adpch_asyncd:warning]: adpch asyncd: Resetting SCSI 10a target 3 to clear outstanding I/O. Sat Sep 8 11:05:05 VET [adpch_intrd:warning]: adpch_timeoutd: 10a: unquiescing bus Sat Sep 8 11:06:10 VET [adpch_intrd:warning]: Unexpected page code: Ultrium 3 serial number not available. Sat Sep 8 11:34:49 VET [rc:info]: relog syslog Sat Sep 8 11:33:24 VET [adpch_asyncd:warning]: adpch asyncd: Resetting SCSI bus 10a to clear outstanding I/O. Sat Sep 8 11:34:56 VET [adpch_asyncd:warning]: adpch asyncd: Resetting SCSI bus 10a to clear outstanding I/O. Sat Sep 8 11:36:28 VET [adpch_asyncd:warning]: adpch asyncd: Resetting SCSI bus 10a to clear outstanding I/O. Sat Sep 8 11:41:17 VET [adpch_asyncd:warning]: adpch asyncd: Resetting SCSI bus 10b to clear outstanding I/O.