NDMP blocking factor for Oracle Secure Backup?

Anyone know how to set this in Oracle Secure Backup for NDMP sessions from NetApps (FC tape drive connected directly to netapp)?

Thanks.

On 03/07/2012 02:18 AM, Mike Thompson wrote:

Courtesy of some helpful engineers over at NetApp monitoring the list ;)

This parameter is indeed controlled by NetBackup, not via the policy includes, but by the server-level parameter SIZE_DATA_BUFFERS_NDMP on the NetBackup master server.

These pages describe the parameter to change:

http://www.symantec.com/business/support/index?page=content&id=TECH51967 http://www.symantec.com/business/support/index?page=content&id=TECH51967 http://www.symantec.com/business/support/index?page=content&id=HOWTO5615... http://www.symantec.com/business/support/index?page=content&id=HOWTO56152#v19527723

By cranking that value up to 256kb from the default 64kb, I see 'record size' has changed in the ndmpd logs, and the write speed on our FC NDMP backups has doubled!

Sweet!

On Tue, Mar 6, 2012 at 4:38 PM, Mike Thompson <mike.thompson@gmail.com mailto:mike.thompson@gmail.com> wrote:

Hey all,

I'm trying to increase performance of fiber channel NDMP backups
we have going to a remote tape robot (bridged over WAN via some
Cienna gear).

I would like to try increasing the blocking factor that the filer
uses when writing to tape over NDMP.

I'm running Ontap 8.0.1 c-mode, with NetBackup 6.5.

None of the docs explain how to do this, but there is mention of
blocking factor in the Data Protection manual.  All it says is
that block size up to 256KB is supported, and that the variable
MOVER_RECORD_SIZE is what controls that.

It appears that you can send variable settings to NDMP by using
'set variable=value' at the top of your includes list in the
backup policy in NetBackup.

I have tried putting 'set MOVER_RECORD_SIZE=256' at the top of my
includes list, and running the job, but I get this in the
/mroot/etc/mlog/ndmpd.log:

INFO: Pass through of unknown START BACKUP variable
MOVER_RECORD_SIZE with value 256

I have also tried setting the variable DATA_BLOCK_SIZE, but get
the same result.

So the question is, how do I set the blocking factor for NDMP backups?

---

Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters