Greetings,
I have a SAS stack (plus other FC ds14s) in a FAS60xx cluster running 7.3.5.1. It has 2 quad port SAS HBAs per filer. The stack currently uses ports 6a and 7d on each filer.
I need to add a couple more stacks. To make the cabling consistent I would like to move the current 7d connection to port 7a. When I moved the cable from 7d to 7a on one of the heads, it never brought the port online and never saw the disks on that port. I tried the storage enable adapter 7a but it still showed it was offline. I ran various sysconfig, storage show, disk show, etc, type commands to get the system to go find the disks on the new path. Nothing seemed to help. I waited 5 minutes after doing this just in case there was some type of discovery lag, but they never showed up. When I plugged back into 7d, everything is fine.
I thought moving to a new port should work. Is there something else I'm missing to make this work?
Thanks,
Jeff