We have installed dual port 10Gbe (x1008a-r6) in our FAS3170A, configured them as a vif using lacp, with load balancing as mac.
What we are noticing is that we are only get 1.4Gbits bandwidth per port. Even though we should realy be achiving at least 20Gbits.
The filers connect to a 6509 CISCO switch, with each interface connecting to a different module for redundancy. The two interfaces from the filer define a port channel on the switch so that they reflect the vif on each filer.
The tool we use to check on the throughput is called Solarwinds and Orion. This tool shows that: a. For netapp1, each interface is shown to work at 1.4101Gbits. The vif is shown to work at 2.8201Gbits. b. For netapp2, each interface is shown to work at 10Gbits. The vif is shown to work at 20Gbits, but we don't get more that 2.8201 Gbits
Is this normal or what are we misising? We have a case open (2001542643) is anyone for NetApp has access.
Thanks