9 Apr
1997
9 Apr
'97
2:52 p.m.
We're running 4.0.1c with 2 100tx-fd cards plugged into a cisco cat 5000. The ports on the cat are set to auto detect 10/100 half/full duplex but they keep deciding the toaster's interfaces are half duplex, any ideas?
Almost the same setup here.....on the Cat5k you need to do this:
set port speed m/n 100 set port duplex m/n full
Ahh, I only every tried the latter, which kept telling me the port was in auto-sensing mode.
Thanks.
--
Ronan Mullally 'In the Beginning there was
Network Manager nothing, which exploded.'
Ireland On-Line -- Terry Pratchett.