There never was any requirement or designation of a "management" port in ONTAP. Most filers pre-3000 series had a single on-board 100Mb port that many decided would be a management port, but it possesed no special privledges or function other than it was the port that the filer would obtain its first address via DHCP if the filer booted and was not configured. For filers with multiple on-board ports, that port is the "e0a" port (same as the FAS 250/270). But that's really the only thing special about the on-board port. If you CHOOSE to make one of the ports a management port, you can, but you don't have to. You could use vlan tagging as specified below so you don't chew up a port. Or if by "management" port you just want a separate port to login to the port, consider using the RLM port (if your filer has one, I think you have to order a 3020 with one, but the 3050 and above have them standard) as the management port.
Just a thought.
-- Adam Fox NGS Tools Developer adamfox@netapp.com
_____
From: Linux Admin [mailto:sysadmin.linux@gmail.com] Sent: Wednesday, January 03, 2007 6:01 PM To: Blake Golliher; toasters@mathworks.com Subject: Re: 3020 Cluster: which one is management interface
Blake, Thanks! So which one is managment then? I see dedicated managemnet iterface on all filers but 3020. Or do you manage over the data IP? Thanks
On 1/3/07, Blake Golliher thelastman@gmail.com wrote:
You can use vlan tagging on it that final multi mode trunk vlan. There should be 3 slots available for expansion cards if you need a dedicated interface for managment. Depending on how much storage is attached to this config, you should be able to use one of those slots for a network card. -Blake On 1/3/07, Linux Admin sysadmin.linux@gmail.com wrote: > Folks, > Not familiar with 3020 series at all. I see 4 nics (e0a, e0b, e0c,e0d) on > the back of each head. > Does it mean I have sacrifice one to be management and only 3 are available > as data? > Have NetApp change things? Or can I used all 4 in single/multi vips? > I was going to do e0a and e0c in single A, e0b and and e0d in single B, and > Multi VIP C on top of Sinlge A and Single B. > Not sure what to do about management. > Thanks for help >