Does ova appliances even have a cli? I am just completely dumfounded, the environment is just usable with out any analytical tools. Alerts are meaningless.
On Apr 21, 2015, at 3:30 AM, Mark Flint mf1@sanger.ac.uk wrote:
If you set up the event route and event destination stuff, and you have OCUM with PerMgr connected, both will advise you of issues, including if there’s a ‘bully’ volume in an aggregate. It’s a little weird, cos PerMgr sets it’s own thresholds, based on what it sees your disks doing initially……it works as a good indicator of an issue, but you need the CLI to pin it down further. YMMV, cos I’m no expert with OCUM yet*
~Mark
mark.flint@sanger.ac.uk
- may occur at some point in the distant future, but unlikely :)
On 20 Apr 2015, at 19:48, Iluhes iluhes@yahoo.com wrote:
Thanks!! What is killing me is that I dont know how to check with OPM is even passing data to OCUM. I followed the steps on linking them together, but how do I test? Is this seriusly going to be end state and netapp will no longer have performance analytical tool?
On Monday, April 20, 2015 1:20 PM, "Weber, Mark A" mark-a-weber@uiowa.edu wrote:
I don’t think you can, plus no node level or cluster level view or aggregate, network…
What I do is setup OPM to send stats to graphite: http://transitiontactician.com/?p=24 http://www.dburkland.com/how-to-setup-graphite-to-visualize-oncommand-perfor...
m
From: Iluhes [mailto:iluhes@yahoo.com] Sent: Monday, April 20, 2015 1:00 PM To: Weber, Mark A Cc: Toasters Subject: Re: what in the world happend to performance (dfm) advisor with CDOT
How do I see which volume is eating the performance? Do I have to go through each volume manually via search?
On Monday, April 20, 2015 12:58 PM, Iluhes iluhes@yahoo.com wrote:
8.3 forces to use 6.2 right? So there is 5.x possibility. I will try searching, but it still seems significantly crippled, and I mean significantly. Is anyone listening in netapp. They are pushing this CMOD so very much, and now what?
On Monday, April 20, 2015 12:38 PM, "Weber, Mark A" mark-a-weber@uiowa.edu wrote:
There isn’t feature parity with DFM yet. To view IOPS/etc graphs, search for the volume/aggr/node using the search box in OPM (not OCUM)
m
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Iluhes Sent: Monday, April 20, 2015 12:22 PM To: Francis Kim Cc: Toasters Subject: Re: what in the world happend to performance (dfm) advisor with CDOT
I see nothing in OCUM, no performance graphs, no ability to drill into iops or anything... I connected OCUM with perfromance manager and nothing I can find where I can see details on the performance like I would be able to get with Managemnt console and Performace advisor
On Monday, April 20, 2015 12:09 PM, Francis Kim fkim@BERKCOM.com wrote:
Did you check out OnCommand Unified Manager? DFM has been rolled into OCUM. OCUM 6.1 and beyond is a CDOT-specific release.
Francis Kim | Engineer 510-644-1599 x334 | fkim@berkcom.com
BerkCom | www.berkcom.com NetApp | Cisco | Supermicro | Brocade | VMware
On Apr 20, 2015, at 10:06 AM, Iluhes iluhes@yahoo.com wrote:
What happened? Where are all the performance graphs, they are all gone. Did the tool get killed? The performance manager is almost empty
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters