I found this on earlier threads;
in exportsfs, you can export a path that uses a different backing store, via the "actual" option.
so, if you have a volume called (e.g.) "changeme", but you want users to see it as "newname", use:
/vol/newname/QTREE -actual=/vol/changeme/QTREE
According to this the volumes can be moved.
James
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Robert Lazzurs Sent: Friday, November 23, 2007 3:55 AM To: toasters@mathworks.com Subject: Re: Can you allocate space from one aggregate to a volume on another?
Is there any way this can be done that is fully transparent to the end users of the storage.
We have a similar situation and while we will be moving to GX in the long term this is not something that can be done in the short term and we are fast running out of space on our original aggr.
If a volume cannot be moved to another aggr without the end users noticing can a LUN be moved to another volume without end users noticing?
Kind regards,
On Nov 15, 2007 4:48 PM, Fox, Adam Adam.Fox@netapp.com wrote:
If I understand you correctly, I don't think you can do what you want
to
do. It sounds like you want a volume to have space allocated in multiple aggregates. That won't work. You could copy an entire volume into a new
aggregate,
but you can't have a flex vol span aggregates. At least not in ONTAP 7.
ONTAP
GX can do this, but that's a very different configuration and you'd need to work closely with your sales team to see if it's appropriate for your environment.
-- Adam Fox adamfox@netapp.com
-----Original Message----- From: Bryano [mailto:Bryan.Price@firstassistinsurance.co.uk] Sent: Thursday, November 15, 2007 7:48 AM To: toasters@mathworks.com Subject: Can you allocate space from one aggregate to a volume on another?
We currently have a fas 940 with the following config:
3x 144GB FC shelves all but 2 disks are in aggr1 which equates to
approx
3.9TB useable space which is approx 5.7TB raw (excluding the 2 spares) containing 4 volumes
5x 72GB FC shelves with 8 assigned to aggr2 (60 spares) containing 1 volume
We would like to increase the size of aggr1 and therefore plan to repalce 2 of the 72GB shelves with 144Gb, 4 of which will be retained
as
spares, thus giving us an extra 3.4TB of raw space to add to aggr1. Looking at the system configuration guide for the fas940 it states
that
the max raw aggregate size is 8TB therefore this would take aggr1 over the limit.
Is it possible to create a new aggregate (aggr3) assign the new 144GB drives to it but assign the space to the volumes held on aggr1?
As it stands if we were to replace 2 shelves with 144GB drives and remove 1 72GB shelf we would have a max size (based on 5x 144GB and 2x 72GB shelves) of 12TB which takes us to the max raw capacity of this filer using FC-AL drives.
Thanks
-- View this message in context:
http://www.nabble.com/Can-you-allocate-space-from-one-aggregate-to-a-vol
ume-on-another--tf4811616.html#a13766859 Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.