Well, if you take a look at /etc/sysconfigtab, you'll be able to see all the "right" configurations. One of the lines read:
allow F740 X201X 1 6,2 2
which actually means that it's slots 6 and 2. (This is from a 6.1.1 system also). There are two options: The manual is right and this file has a typo (happened before) which means you can just correct it in this file and that's it (if the tape is working OK, then this should be the fix). The other option is that the manual is wrong and the file right, which means you have to move the adapter to either slot 2 or 6. I would consult NetApp before doing any of these...
Alex.
-----Original Message----- From: Jim Davis [mailto:jdavis@cs.arizona.edu] Sent: Monday, May 13, 2002 13:39 To: toasters@mathworks.com Subject: 740 SCSI tape controller slot assignment?
A 740 running 6.1.1 keeps logging
sysconfig: SCSI Adapter card (PN X201X) in slot 1 must be in one of these slots: 6,2.
and indeed we do have a DLT7000 hooked up to a SCSI adapter in slot 1.
But checking the 6.1.1 configuration guide, "SCSI for tape" shows slot 6 as the first choice ("X1") and slot 1 as the second choice ("X2") and doesn't list slot 2 as a valid choice at all. What am I missing?