I should of added that what I really want to do is config ControllerB but when I tried to access it, I got the same behaviour as I explained below. I was using ControllerA as a test.
When I start a console on SP I can see the result of the command I entered on the HyperTerminal. But I need to config controller.
-------------------------------------------------------------------------------------------------------------------------------------------------------- Thanks David
From: Sebastian Goetze [mailto:spgoetze@gmail.com] Sent: 16 January 2013 17:08 To: David Laithwaite Cc: toasters@teaparty.net Lists Subject: Re: console issue
Hi David,
how about connecting via SP and then typing "system console"...
Maybe you could investigate further that way... (It's best practice, anyway)
Sebastian On 16.01.2013 17:41, David Laithwaite wrote: Hello Toasters,
I have a new FAS2240-4, I installed using a laptop serial port connected to the Console Port with no problem. Now, when I connect via the same cable etc I cannot see anything on the HyperTerminal, there is no response. If I plug the cable into a FAS2020 or a FAS3140 I get a login prompt and can login ok. I have powered-off and re-started with the Console cable and nothing, I tried Putty as well the result was the same. I have tried a new cable and that doesn't work. Any ideas ?
-------------------------------------------------------------------------------------------------------------------------------------------------------- Cheers David
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
_______________________________________________
Toasters mailing list
Toasters@teaparty.netmailto:Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.