Thanks for the replies. It sounds like it might be time to bite the bullet and move to cdot.
Out of curiosity, since NetApp is no longer developing 7-Mode is the plan to eventually sunset flexcache and is there some other way to get flexcache like capability in cdot?
On Wed, Jan 13, 2016 at 3:40 PM, Payne, Richard richard.payne@amd.com wrote:
Yes, you can do this. I have a cluster mode install at one site with caches (7mode) at other sites.
--rdp
-----Original Message----- From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Steven Kreuzer Sent: Wednesday, January 13, 2016 3:38 PM To: toasters@teaparty.net Subject: Flexcache w/ Clustered OnTap
I was curious if anyone knew if the following config is supported.
Our 'main' filer has a volume that we make available in remote offices using flexcache. All of our filers are still running 7-Mode and we are about to do a forklift upgrade of our main filer.
It is tempting to go to Clustered OnTap but its not clear if I would also have to upgrade all the filers in remote offices to Clustered OnTap at the same time as well or if I can continue to use 7-Mode and still be able to access the volume on the main filer via flexcache.
Thanks _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters