Steffen Kammerer-2 wrote:
Hi there,
is there a possibility to read-out the overall runtime of disks in a NetApp shelf?
Regards,
Steffen
"storage show disk -a" shows the Power-on Hours for each drive in your system. E.g:
Disk: 0a.16 Shelf: 1 Bay: 0 Serial: 3KN1ST5500007648XN3N Vendor: NETAPP Model: X275_S15K4146F15 Rev: NA02 RPM: 15000 WWN: 2:000:0014c3:d779f4 UID: 20000014:C3D779F4:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000 Downrev: no Pri Port: A Power-on Hours: 24990 Blocks read: 7320162784 Blocks written: 1378658312 Time interval: 502:22:14 Glist count: 0 Scrub last done: 00:03:05 Scrub count: 1029 LIP count: 0 Dynamically qualified: No