Chaim,
Download WireGauge (http://now.netapp.com/NOW/download/tools/wiregauge/) and try it out. It is very handy for trying to figure out mixed path configuration.
Jeff
On Wed, Nov 16, 2011 at 5:04 PM, Blake Golliher thelastman@gmail.com wrote:
Are you running 7.3.3 or later? What does sysconfig -a tell you? The top part tells you if it's Multi-Path HA or Mixed-Path.
NetApp Release 8.0.1P4 7-Mode: Sat Apr 2 13:41:25 PDT 2011 ....... System Rev: A2 System Storage Configuration: Multi-Path HA System ACP Connectivity: Full Connectivity ........
-Blake
On Wed, Nov 16, 2011 at 3:27 PM, Chaim Rieger chaim.rieger@gmail.com wrote:
assuming i have two loops (id 00-04, and 10-18) 1 4 port sas card (0a-0d)
loop 1 00A connects to 001a 0a 00B connects to 001b 0a ... 04A connects to 001b 0b 04B connects to 001a 0b loop2 10A connects to 001a 0c 10B connects to001b 0c ... 18A connects to 001b 0d 18B connects to 001a 0d
KEY = 00A = Shelf ID 00 Module A 001A = Filer 001a/b 0a = SAS port A
Its been a long three days of no sleep, but this is mpha, correct ?
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters